Clutch Pedal response

   / Clutch Pedal response #1  

grandpawj

Member
Joined
Jun 20, 2013
Messages
38
Location
Lancing, TN
Tractor
Farmtrac 535 W/ 5245 front end loader(turf tires), MFG 2006
Got a quick question. Should the clutch engage at the top of the pedal swing (just before removing foot from pedal) or should it release a couple inches after beginning to release the pedal. (closer to full pedal depression)? Reason I ask, it is often difficult for me to gradually release the clutch without it grabbing at the top of the pedal swing and snapping my neck and spinning a tire.
 
   / Clutch Pedal response #2  
Never really payed attention , but I would say in the last quarter, mine has a 2stage
 
   / Clutch Pedal response
  • Thread Starter
#3  
How can I tell if mine is a 2 Stage clutch and if it is, how do I use (operate) it.
 
   / Clutch Pedal response #4  
clutch part way in PTO still spins, but engine disengaged. Clutch all the way in both stop
 
   / Clutch Pedal response
  • Thread Starter
#5  
Thanks Clint S, While using the 535 yesterday I noticed the operation of the two stage clutch. Down about 1/4 of the way the clutch disengages to change gears, and all the way down releases the PTO as well. I found my shifting was much smoother if I only pushed clutch pedal 1/4 down.
 

Marketplace Items

2015 Ford Focus Hatchback (A59231)
2015 Ford Focus...
3650 (A47477)
3650 (A47477)
2023 CAN-AM DEFENDER RTV (A59823)
2023 CAN-AM...
2008 Freightliner Allegro Bay Class A Motorhome (A59231)
2008 Freightliner...
UNUSED FUTURE RR78-78" HYD ROCK RAKE (A60432)
UNUSED FUTURE...
2018 PJ TRAILER 32FT GOOSENECK TRAILER (A55745)
2018 PJ TRAILER...
 
Top