Clutch Pedal response

   / Clutch Pedal response #1  

grandpawj

Member
Joined
Jun 20, 2013
Messages
38
Location
Lancing, TN
Tractor
Farmtrac 535 W/ 5245 front end loader(turf tires), MFG 2006
Got a quick question. Should the clutch engage at the top of the pedal swing (just before removing foot from pedal) or should it release a couple inches after beginning to release the pedal. (closer to full pedal depression)? Reason I ask, it is often difficult for me to gradually release the clutch without it grabbing at the top of the pedal swing and snapping my neck and spinning a tire.
 
   / Clutch Pedal response #2  
Never really payed attention , but I would say in the last quarter, mine has a 2stage
 
   / Clutch Pedal response
  • Thread Starter
#3  
How can I tell if mine is a 2 Stage clutch and if it is, how do I use (operate) it.
 
   / Clutch Pedal response #4  
clutch part way in PTO still spins, but engine disengaged. Clutch all the way in both stop
 
   / Clutch Pedal response
  • Thread Starter
#5  
Thanks Clint S, While using the 535 yesterday I noticed the operation of the two stage clutch. Down about 1/4 of the way the clutch disengages to change gears, and all the way down releases the PTO as well. I found my shifting was much smoother if I only pushed clutch pedal 1/4 down.
 

Tractor & Equipment Auctions

UNUSED RAYTREE RMBD50-50" HYD DRUM MULCHER (A60432)
UNUSED RAYTREE...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
2017 CAT 315F LCR EXCAVATOR (A58214)
2017 CAT 315F LCR...
2012 NISSAN 110 FORKLIFT (A55745)
2012 NISSAN 110...
2007 Ford F-350 9ft. Stakebody Flatbed Truck (A55852)
2007 Ford F-350...
2007 FREIGHTLINER M2 26FT CDL REQUIRED BOX TRUCK (A59905)
2007 FREIGHTLINER...
 
Top