check timming kioti lb 2202

[frank360]

trying to find out if anyone knows how to check injection timming the only thing my book says it should be 25 degrees before top deed center,the only thing i see is f1,f2,f3 on fly wheel but i do'nt know how to go about checking it i know i have 5 shims under pump but know nothing about timming.

 

[depratt_equip]

Frank

Do you happen to have a workshop manual for this tractor? It will help out alot.

To check timing (from LB2204 Workshop Manual)

1 ) Start and run engine at idle

2 ) Attach a timing light to the injection pipe

3 ) Check to see if the timing check window of the clutch housing is aligned with the F1 mark on the flywheel

4 ) If the timing of the fuel injection is off, adjust with shims. Each shim changes crank angle by approximately 1.5 degrees.

 

[frank360]

No timming light,where can i find one?

 

[depratt_equip]

Do a search on the internet for "diesel timing light" you should come up with some hits. Or check your local auto parts store. Just a warning they are pretty pricey.... Just be sure to get one for the right size fuel line.

Found this one pretty fast doing a search:
Diesel Timing Light

 

[depratt_equip]

Frank

Just checking to see if you had any luck with your LB2202 and getting the timing check?

Regards,

 

[frank360]

its ok every thing is fine now its working like it should the govnor linkage was set up wrong that why i had raw fuel,going to sell and by L-2800 kubota when i sell my kioti whats a good asking price in good condition 685 hours. thanks for your concerns

 

[depratt_equip]

It would be hard for me to say without seeing the unit, and performing an inspection. Glad to hear you got it all fixed up!