Cheap Key Safe
- Thread starter moonlite
- Start date
- Views: 3602
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Yeah,... but it's easy to get close with your IP address.. 
soundguy
soundguy
studor
Veteran Member
- Joined
- Dec 23, 2007
- Messages
- 1,464
- Location
- Eastern Ontario
- Tractor
- Jinma 284(Spirit fel), MF 135 (MF200 fel)
Lots of panels have locking capability
Soundguy -- if you can find me by my IP address my internet provider does not have enough customers
Soundguy -- if you can find me by my IP address my internet provider does not have enough customers
dcyrilc
Super Member
Lots of panels have locking capability
Soundguy -- if you can find me by my IP address my internet provider does not have enough customers
My research puts you somewhere in Eastern Ontario.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
well that should narrow it down.. there are like what? 3 roads in canada
soundguy
soundguy
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Only one road the goes east and west
studor
Veteran Member
- Joined
- Dec 23, 2007
- Messages
- 1,464
- Location
- Eastern Ontario
- Tractor
- Jinma 284(Spirit fel), MF 135 (MF200 fel)
.
Makes our maps simpler
-- and no need for GPS, however that one east west road is 16 -20 lanes in spots and always seems to have some American driving in the fast lane @ the speed limit -- last one I saw had Florida plates -- you been looking for me?studor
Veteran Member
- Joined
- Dec 23, 2007
- Messages
- 1,464
- Location
- Eastern Ontario
- Tractor
- Jinma 284(Spirit fel), MF 135 (MF200 fel)
Moonlite -- welcome aboard and hope you will forgive the hijack -- your idea for the key safe is a good one. It would proably work well for a lot of small items. With the right stickers on it I am not sure anyone would ever look there -- including the electrical inspector
Tig
Elite Member
well that should narrow it down.. there are like what? 3 roads in canada
soundguy
Yeah, but they're not in Ontario.
radioman
Super Member
you guys crack me up! all seriousness aside- the panel idea is a good idea when its placed in the right area. in the bedroom would be a red flag, wouldn't it ?
all seriousness aside- the panel idea is a good idea when its placed in the right area. in the bedroom would be a red flag, wouldn't it ?studor
Veteran Member
- Joined
- Dec 23, 2007
- Messages
- 1,464
- Location
- Eastern Ontario
- Tractor
- Jinma 284(Spirit fel), MF 135 (MF200 fel)
Depends on the electrical equipment you have in the bedroom
bobodu
Platinum Member
- Joined
- Mar 8, 2004
- Messages
- 960
- Location
- Whitley County,In.EIEIO
- Tractor
- Farmnought.Gravely Model L,Gravely Model LI,1941 Clinton two wheeler
With the right stickers on it I am not sure anyone would ever look there -- including the electrical inspector
Hmmmm....now I know what to do with the old fuse box with the knob and tube wiring!!
R_Walter
Gold Member
Some electricians couldn't even find it.
dcyrilc
Super Member
We see electrical panels all day long --- why would we want to look at one away from work?
G.P.S.Investments
Member
LMAO you guys sure know how to crack up a guy reading at work.But seriosly the elec box sounds great .But do as I do,sign reads "THIS HOUSE IS PROTECTED BY A SHOTGUN 3 NIGHTS A WEEK",you guess which "3".
czechsonofagun
Elite Member
When I was production engineer in tool factory - long time ago - I build a small safe myself. Since it was in Prague, all houses are brick or concrete and all you needed was the front plate and a hole in the wall.
Anyway, I found some scrap metal - it was CSN19552 tool steel for aluminum molds, I think US equivalent would H13 - one inch thick plate. I squared it on a mill and drilled as big hole as possible in the middle and on big lathe turned corresponding piece. For the lock I used a door lock insert with some modifications. There were no hinges, you had to unlock the round piece and take it all out. The whole thing was 20 pounds or more and to take the door out you needed both hands. But it was free - and the steel was an overkill
Reminds me of friends dad. He worked in a Airplane factory and in the heap pile found a fan from turboprop engine. Next thing you know, it was a cutting blade on his push mower
Anyway, I found some scrap metal - it was CSN19552 tool steel for aluminum molds, I think US equivalent would H13 - one inch thick plate. I squared it on a mill and drilled as big hole as possible in the middle and on big lathe turned corresponding piece. For the lock I used a door lock insert with some modifications. There were no hinges, you had to unlock the round piece and take it all out. The whole thing was 20 pounds or more and to take the door out you needed both hands. But it was free - and the steel was an overkill
Reminds me of friends dad. He worked in a Airplane factory and in the heap pile found a fan from turboprop engine. Next thing you know, it was a cutting blade on his push mower
Here are some similar links:
