simplicityguy92
Bronze Member
- Joined
- Mar 5, 2008
- Messages
- 88
can somebody tell me the measuerments for a cat 0 3pt hitch
im thinking of building one?
im thinking of building one?
catagory 0 3pt
- Thread starter simplicityguy92
- Start date
- Views: 1465
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Category 0
For Tractors with up to 20 Horsepower
Top Link Pins are 5/8 inch in Diameter
Lift Arm Pins are 5/8 inch in Diameter
here's some of it...
soundguy
For Tractors with up to 20 Horsepower
Top Link Pins are 5/8 inch in Diameter
Lift Arm Pins are 5/8 inch in Diameter
here's some of it...
soundguy
blacksmith
Bronze Member
- Joined
- Jan 6, 2004
- Messages
- 66
The draw bar should be about 20" of usable flat length or 20" between lift arms.
OP
simplicityguy92
Bronze Member
- Joined
- Mar 5, 2008
- Messages
- 88
i have the top link and soon i will have the bottom links
i need to no wat the distance is between the links
i need to no wat the distance is between the links
bobodu
Platinum Member
- Joined
- Mar 8, 2004
- Messages
- 960
- Location
- Whitley County,In.EIEIO
- Tractor
- Farmnought.Gravely Model L,Gravely Model LI,1941 Clinton two wheeler
Do you mean the distance between the top link and the lifts arms??
Put your lifts arm level,hold a stick straight out from the top link and measure the distance.It is really not a crucial measurement,but roughly parallel to the lift arms is good.
Put your lifts arm level,hold a stick straight out from the top link and measure the distance.It is really not a crucial measurement,but roughly parallel to the lift arms is good.
OP
simplicityguy92
Bronze Member
- Joined
- Mar 5, 2008
- Messages
- 88
so for the bottom links its 20'' between them ?
blacksmith
Bronze Member
- Joined
- Jan 6, 2004
- Messages
- 66
Yes 20" is a good measurement.