Case IH 255 Engine Stop Solenoid

   / Case IH 255 Engine Stop Solenoid #1  

Norskie

New member
Joined
May 24, 2015
Messages
7
Location
SW WI
Tractor
Cae IH 255
Thanks for any info provided. The 255 diesel no longer shuts off with the switch. I have to pull the engine shutoff cable. Previously I could hear the engine stop solenoid click when I turned the key on. That no longer happens. The solenoid has 12 volts on both connectors with the switch on or off. Even when disconnecting the battery and reconnecting it I don't hear the solenoid. Why is there 12 volts with the switch on or off? Does that mean the Control Timer Unit is bad? A bad solenoid wouldn't (?) explain the constant 12 volts. I am at a loss. Any help is greatly appreciated.
 
   / Case IH 255 Engine Stop Solenoid
  • Thread Starter
#2  
NOTE: Don't see how to edit. The solenoid apparently is good. If I ground the non supply side, the solenoid clicks. Does that mean the Control Timer Unit is not supplying a ground?
 
   / Case IH 255 Engine Stop Solenoid
  • Thread Starter
#3  
Found the problem was a blown fuse. The second from the left.
 

Tractor & Equipment Auctions

2018 E-Z Beever M12R Towable Brush Chipper (A50322)
2018 E-Z Beever...
2017 Polaris 500 Ranger Diesel Utility Cart (A50324)
2017 Polaris 500...
New/Unused Quick Attach Seeder (A54865)
New/Unused Quick...
CAT 420D IT (A47477)
CAT 420D IT (A47477)
2012 WACKER NEUSON CORPORATION DBA WACKER NEUSON LTN6 LIGHT TOWER (A55745)
2012 WACKER NEUSON...
2005 Dodge Caravan Van (A51694)
2005 Dodge Caravan...
 
Top