XR3037 Workshop Manuel

/ XR3037 Workshop Manuel #1  

bytwnracer

New member
Joined
May 7, 2024
Messages
2
Tractor
Branson
Looking for a workshop manual. No dealer close by to go ask for one.

I have a 2018 XR3037 cab model. It is not starting and I got the issue down to the fuel shut off solenoid not getting power. When i unplug the connector on the solenoid and give it power I can hear it click and the tractor will start but it goes to full throttle max rpms. Tractor will turn off when I disconnect power to solenoid so solenoid is working as it should.

Is there a fuse or relay that would prevent fuel shut off solenoid from getting power when I turn the key? If so where is that fuse or relay located? Or possibly a bad ignition switch?

Why would tractor go into full throttle when I do start it with zero response from foot or hand throttle control?

Lastly I get two codes on dash but neither seem to have anything to do with my problem AB07 and AB11.

Thanks for any input!
 

Attachments

  • 20260323_195433.jpg
    20260323_195433.jpg
    2.5 MB · Views: 26
  • 20260323_195434.jpg
    20260323_195434.jpg
    2.3 MB · Views: 25
 
Top