Case 580C
- Thread starter MRayburn
- Start date
- Views: 2812
-
- Tags
- case-ih 580c
Welcome to TBN. 
Briana03
Elite Member
Hello & WELCOME to TBN!
I moved your thread to the Construction Equipment Forum.
I moved your thread to the Construction Equipment Forum.
TraderMark
Gold Member
- Joined
- Feb 25, 2001
- Messages
- 383
- Location
- Southeast Georgia
- Tractor
- Ford 1720, 2910 John Deere 970, Case 1845
I wish I could find a good 580C myself.
I worked for a Case dealer during the 580B/C/D era so if you have questions, I'll be glad to share what I know.
Mark
I worked for a Case dealer during the 580B/C/D era so if you have questions, I'll be glad to share what I know.
Mark
flatbed
Member
Trader mark, I have a 580D with a shuttle shift. My question is how many gears do the manual trany on the floor have? My shift knob is faded I can not distinguished either forward is fwd or pulling the shift liver back is it fwd. or reverse? All I have been using is the shuttle so far however, I might have to push some heavy load dirt someday would like to know where to place the floor mounted shifter. Thanks a bunch. Sorry have to jump in on the blog.
TraderMark
Gold Member
- Joined
- Feb 25, 2001
- Messages
- 383
- Location
- Southeast Georgia
- Tractor
- Ford 1720, 2910 John Deere 970, Case 1845
Flatbed,
Sorry, but I just saw your question here.
The manual transmission shifter in the floor shifts a 4 speed transmission. A simple H pattern.
Mark
Sorry, but I just saw your question here.
The manual transmission shifter in the floor shifts a 4 speed transmission. A simple H pattern.
Mark
flatbed
Member
Thanks, "H" pattern all forward it is up to the shuttle shift to change direction. Thanks again.