BX24 Front Axle Case

   / BX24 Front Axle Case #1  

matt421

New member
Joined
Jul 5, 2006
Messages
8
Location
Blue River, Kentucky
Tractor
Kubota BX24
Just wanted to know what type of fluid to use in the front axle case. Do you use the UDT or GEAR Oil SAE 80 or SAE 90. Or could you use either or? Thanks Alot.
 
   / BX24 Front Axle Case #2  
Kubota installs the very same fluid that is used in the transmission case. However, you may use heavier gear fluids if you like.
 
   / BX24 Front Axle Case #4  
If you lived in the Far North you might need to stick with SUDT (or PUDT), which won't turn to molasses at frigid temps... but those of us in moderate climates don't get much benefit. Kubota "approves" either one. Gear oil is more than adequate for this (high-pressure/low-speed/non-hydraulic) application, and more cost-effective.
 
   / BX24 Front Axle Case
  • Thread Starter
#5  
Thanks for everyones answer. This is a great site for questions and answers. Again, Thanks.
 

Tractor & Equipment Auctions

TEST BID LOT (A50774)
TEST BID LOT (A50774)
Toro Sprayer Cart (A50324)
Toro Sprayer Cart...
2005 Sterling Single Axle Dump (A47384)
2005 Sterling...
2013 Ford F-150 XLT - EcoBoost, Blown Engine, Good Parts Truck (A51039)
2013 Ford F-150...
2014 Dodge Charger Sedan (A50324)
2014 Dodge Charger...
2016 Ford Explorer AWD SUV (A50324)
2016 Ford Explorer...
 
Top