BX1860 or 2360?
- Thread starter Danilo
- Start date
- Views: 13272
-
- Tags
- kubota bx1860
PHILIP8N
Veteran Member
I would only put in truck bed with mmm on. FEL would be too long, tailer only then. Thanks. Philip.
radioman
Super Member
take a look at his thread on this.
http://www.tractorbynet.com/forums/kubota-buying-pricing/154294-bx1500-1850-1860-tires-wheels.html
bp fick
Super Member
Yes, they are indeed the larger wheels and tires. Since I do not mow with an MMM, I like the increased traction and handling. If I needed to mow, I'd use a Rear Finishing Mower.
If you install a mid deck mower, your clearance will only allow the OEM wheels and tires.
Hondapro
Bronze Member
I went thru the same process about a month ago,I knew the 1860 would suit my needs.The 1860 is slightly smaller than the 2360,after sitting on both of them I felt more comfortable on the 2360 and that is why I went with the 2360.
shrekbelly
Silver Member
- Joined
- Mar 20, 2007
- Messages
- 219
if you want the big wheels on a bx your adding $360.00 - $420.00 to the initial cost of the tractor. shrekbelly
bp fick
Super Member
Actually, you can then subtract the sale of the OEM wheels/tires. About $350 on Craigslist. Net for the upgrade is only $40-80.
BTW, this isn't something the dealer will do at the time of sale, most likely. Do it a month later when you get 'er home. Order the wheels through Whole Goods. Sell the OEMs and you are set. (as long as you don't mow with MMM)
radioman
Super Member
Good luck! 
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
Heading down later today to make the final decision. My dealer has both in stock and the price difference is a grand. So with the larger tires and engine it is really a toss up for me. A grand will buy a lot of diesel though
Yeah it will no more fuel than these things burn especially, but when figured over the number of years you will own it, it really is insignificant. Either will do all you need done, so you really can't go wrong; good luck.
KeithInSpace
Veteran Member
After reading through your initial thoughts, it seems the 1860 would amply suit your needs. Being on a 1 acre plot, the extra maneuverability would be great, I would think.
Personally, I wouldn't consider the 48" deck...only the 54". Likewise, if you got the 2360, I would only consider the 60" deck. I have the 60" and it is great.
Also, I would not even consider the purchase unless you also got a FEL. You will never run out of uses for it, I promise.
Either way, you can't go wrong...
Personally, I wouldn't consider the 48" deck...only the 54". Likewise, if you got the 2360, I would only consider the 60" deck. I have the 60" and it is great.
Also, I would not even consider the purchase unless you also got a FEL. You will never run out of uses for it, I promise.
Either way, you can't go wrong...
KeithInSpace
Veteran Member
?? I would not consider putting even my bald (no attachment) BX2230 on ramps rated for a combined 1,500#. Perhaps if I was going into a shed 1' off the ground, but honestly...that truck bed is nearly 3 feet in the air. If something went wrong, it isn't just a ding on the fender...it would be the nearly complete destruction of the tractor and if you're lucky, you'd avoid serious injury.
I'd want ramps rated for not a pound less than 3,000# EACH to consider driving my tractor into a truck bed like that.
Also, I'd love to see pictures of somebody loading a BX with MMM attached into a truck bed. With just over 4 feet between the wheel wells, I'm not sure how the MMM would fit between there. Even a 48" deck has overhang on one side for blade clearance and the other side for the chute.
More likely would be the removal of the 3PH assembly and BACKING a BX tractor onto a DRW 1-ton 8' truck bed with FEL attached. Using appropriately rated ramps, of course. But not with the MMM attached.
Honestly not trying to be a nay-sayer or a pest, but I'd hate there to be mis-information out there that you could toss these things in a truck like you would a Crapsman...
radioman
Super Member
When I saw the OP intention of getting 48" deck for BX and drive it on the bed of truck, I am thinking I wouldnt do it, but didnt want to post. I am thinking, the biggest problem might be the deck not being really a 48" without the chute, but a 48" swath for sure. Does anyone know, measure for us ?
timswi
Super Member
- Joined
- Nov 18, 2008
- Messages
- 5,301
- Location
- Beaver County Pa
- Tractor
- Kubota BX23 TLB, Kubota RTV1100, Kubota Z724 & Polaris RZR 900 Trail
As far as the ramps go, that's one thing..I would never put that kind of weight on those cheesy tailgate cables that they use nowadays...I've had those break. Not a pretty sight.
JOHNTHOMAS
Super Member
- Joined
- Apr 14, 2008
- Messages
- 7,719
- Location
- Somerset, Ky
- Tractor
- F2690 4WD RTV X1140 MX5400 HST ZD1211
radioman
Super Member
There is no way you need the bx2360. I have an 1860 with a front end loader and 54" mower. I plow a 600 foot driveway (Minnesota), haul rock from one end of my property to another with the bucket, mow 3 acres of hills and 3 acres between grape vines (on a slope) and pull a spray trailer through the same grapes several times a year. There is not once that I wished I had more power or a bigger tractor - The added weight of a bigger tractor would hurt more than it would help. I am going to fill my rear wheels with liquid for better balance when moving buckets of manure and dirt, but that is about it. I have had no problems with it. I have thought back about how hard the decision was to go with the 1860 vs the 2360 - And now I laugh at it. Even with the amount I do the bx1860 is way more than I need.
Here are some similar links:
