3-Point Hitch Bus Hog SQ Setup

[Cane Thing]

What's best way to set up proper tension (length) for center arm on three point hitch for Bush Hog SQ 172? I use it with a Kubota L3940

 

[moored4]

:welcome: to TBN! :thumbsup:

Happy :tractor: ing!

Get on a flat place and adjust the tail wheel so the back of hog is at the height you want. The raise the 3 point till it is the height you want, then adjust the top link longer or shorter so the deck is now soported by the wheel, arms, and top link! Thats how I do mine. I also have a flexable top link!

 

[Cane Thing]

:welcome: to TBN! :thumbsup:

Happy :tractor: ing!

Get on a flat place and adjust the tail wheel so the back of hog is at the height you want. The raise the 3 point till it is the height you want, then adjust the top link longer or shorter so the deck is now soported by the wheel, arms, and top link! Thats how I do mine. I also have a flexable top link!

Thanks a lot! I appreciate it.

 

[whitedogone]

http://www.bushhog.com/images/stories/documents/manuals/Squealer.pdf