Brush Cutter RPM

[J_J]

Does anyone know the max RPM of the Brush Cutter?

 

[duane]

JJ

Pt specs say PTO flow is 8 gpm, and with a 3.0 cubic inch per rev hydraulic motor, this equates to 618 rpm.

Hope this helps
Duane

 

[J_J]

Thanks.

If I am right, that means that you are using 11.7 hp to turn the Brush Cutter on the smaller machines.

 

[Schultz]

That sounds about right, but you only use the amount of power you draw from the load of cutting and turning the mower. Just to turn the cutter would be alot less.