brush cutter dimensions

   / brush cutter dimensions #1  

Oldstuff

Silver Member
Joined
Oct 11, 2009
Messages
153
Location
Missouri
Tractor
'63 Ford 2000
I'm in the process of upgrading to a tractor that has a FEL (not quick disconnect) but am trying to determine if it will fit in my shed with a bruch cutter on it. I know the exact distance from the front of the FEL to the holes in the lift arms at the rear and it looks like my brush cutter (King Kutter) is 8 inches toooo long. I have looked at a couple of websites to determine the physical size is in length and some do not list the length.

Does anyone know of one brand being shoerter than others?

Thanks- Oldstoff
 
   / brush cutter dimensions #3  
Did you addon deck wheel?
 
   / brush cutter dimensions #5  
King Kutter? What size? I can measure my 5 foot one when the rain stops.
 
   / brush cutter dimensions
  • Thread Starter
#6  
wirlbird, it is a 5 footer- I cannot check myself because tractor is 160 miles away

Thanks
 
   / brush cutter dimensions #7  
Just went out and measured my 5 ft wallace , Right at 8 ft from tailwheel to pins,
 
   / brush cutter dimensions #8  
wirlbird, it is a 5 footer- I cannot check myself because tractor is 160 miles away

Thanks
Mine was a little tricky to get to due to where I have it stored but looks like 78-80 inches. Definitely under 7 feet.
 
   / brush cutter dimensions
  • Thread Starter
#9  
Thanks wirlybird
 
 

Tractor & Equipment Auctions

(2) 500 GAL WATER TANKS (A50854)
(2) 500 GAL WATER...
2013 KENWORTH (INOPERABLE)W9 SERIES (A50854)
2013 KENWORTH...
2014 FORD F-250 (A50854)
2014 FORD F-250...
2019 Chevrolet Tahoe SUV (A49461)
2019 Chevrolet...
2015 Timpte Hopper Bottom (A50514)
2015 Timpte Hopper...
12-Wheel Pneumatic Pull-Behind Asphalt Compactor (A49461)
12-Wheel Pneumatic...
 
Top