Blink fuse

   / Blink fuse #1  

vince2

New member
Joined
Jun 2, 2013
Messages
21
Location
Scott Co., KY
Tractor
Century 2028 (2003), MF TO30 deluxe (1959?)
My 2003 century 2028 has no current at the electric switch. No lights on dash when try to start. According to the electric diagram, there is a blink fuse to protect the starting circuit. Anyone have an idea what this fuse looks like and where it might be located? Thanks
 
   / Blink fuse #2  
I believe you're referring to the fusible link, not sure why the call it a "blink fuse" in the manual. There should be two of them, one just for the glow plugs and another for the rest of the electrical system.

On my Branson, these are located by the starter. Not sure on your model but should be very similar.

It's essentially a plug with a red wire doing a loop.

1738352980576.png
1738353008210.png
 
   / Blink fuse
  • Thread Starter
#3  
Thanks, that will get me started.
 
   / Blink fuse
  • Thread Starter
#4  
So I found two
1000006880.jpg
2025-02-0113.13.003929560015262857839.jpg
connectors but there were no fuses in them
 
   / Blink fuse
  • Thread Starter
#5  
There was voltage on the connector.
 
   / Blink fuse #6  
Looks like you're missing one somehow.

If you can figure out the right wire gauge, should be easy to make a new one using some spade terminals.
 
   / Blink fuse
  • Thread Starter
#7  
No I found a similar, somewhat smaller in size next to it but did not see a fuse in it.
 

Tractor & Equipment Auctions

3 PHASE SEPARATOR (A52472)
3 PHASE SEPARATOR...
2001 John Deere M665 (A50120)
2001 John Deere...
2008 Ford Crown Victoria Sedan (A51694)
2008 Ford Crown...
2012 Harley-Davidson FLHX Street Glide Motorcycle (A50324)
2012...
2019 Ford Explorer AWD SUV (A50324)
2019 Ford Explorer...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top