Blink fuse

/ Blink fuse #1  

vince2

New member
Joined
Jun 2, 2013
Messages
21
Location
Scott Co., KY
Tractor
Century 2028 (2003), MF TO30 deluxe (1959?)
My 2003 century 2028 has no current at the electric switch. No lights on dash when try to start. According to the electric diagram, there is a blink fuse to protect the starting circuit. Anyone have an idea what this fuse looks like and where it might be located? Thanks
 
/ Blink fuse #2  
I believe you're referring to the fusible link, not sure why the call it a "blink fuse" in the manual. There should be two of them, one just for the glow plugs and another for the rest of the electrical system.

On my Branson, these are located by the starter. Not sure on your model but should be very similar.

It's essentially a plug with a red wire doing a loop.

1738352980576.png
1738353008210.png
 
/ Blink fuse
  • Thread Starter
#3  
Thanks, that will get me started.
 
/ Blink fuse
  • Thread Starter
#4  
So I found two
1000006880.jpg
2025-02-0113.13.003929560015262857839.jpg
connectors but there were no fuses in them
 
/ Blink fuse
  • Thread Starter
#5  
There was voltage on the connector.
 
/ Blink fuse #6  
Looks like you're missing one somehow.

If you can figure out the right wire gauge, should be easy to make a new one using some spade terminals.
 
/ Blink fuse
  • Thread Starter
#7  
No I found a similar, somewhat smaller in size next to it but did not see a fuse in it.
 

Marketplace Items

2017 Yale GLC050VX 3,500 lb LPG Forklift - Powershift, Aux Hydraulics (A61307)
2017 Yale GLC050VX...
Mini Jack Daniels Truck (A55853)
Mini Jack Daniels...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A55851)
iDrive TDS-2010H...
2020 CHEVROLET SILVERADO CREW CAB TRUCK (A59823)
2020 CHEVROLET...
2012 John Deere 6170R (A57148)
2012 John Deere...
RIPPER ATTACHMENT FOR MINI EXCAVATOR (A58214)
RIPPER ATTACHMENT...
 
Top