backhoe teeth pins

[crazy terramite]

does anyone know what the backhoe teeth pin size are on a 2015 T9. are they roll pins? can i get them at hardware store?

 

[DoubleO]

If they are like the ones on my T9, they're a model 156 tooth (something like that) and I order them from a company called Romac.

 

[crazy terramite]

doubleo are u talking about the pins or the teeth?

 

[crazy terramite]

im wondering about the pins that hold the teeth on

 

[DoubleO]

The pins are listed with the teeth.

 

[CarlL]

As DoubleO said, the teeth and the pins are 156 size. I replaced the old rounded ones on my T9 bucket with new Hensley style teeth shortly after I got the machine. Made quite a difference when digging. The 156 pins used for the Hensley teeth are: DIAMETER: .375″ - LENGTH: 2.0″ . If you are going to try and drive the pins out, I recommend getting the correct size roll pin punch. It makes removal much easier.

 

[DoubleO]

I believe I used these on my bucket. Up here in Connecticut it sometimes seems we have more rocks / ledge than dirt.

Item # X156L 5 PACK, 5 PACKS - DIRT On Romac Industrial Parts

They've held up very well.