tary
New member
Lost all lifting on my front bucket. how do i check the pump pressure.
Thanks
Thanks
B7200 lift probems
- Thread starter tary
- Start date
- Views: 1255
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
You can put a hyd gage in a tee in the IN port of the FEL valve.
You should do a pressure and flow check.
You should do a pressure and flow check.
Egon
Epic Contributor
Is it a hydrostatic and does it have more than one pump?
Egon
Epic Contributor
should find it under the the FEL control lever.(front end loader)
It has clutch but is the drive system hydrostatic or a geared transmission. Both systems will have a clutch.
Have you checked the oil level? How about the quick connects, have you taken them apart and put them together? Is the joystick tight or loose and sloppy. They can wear to the point the valve doesn't get actuated.
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
The FEL valve is the joystick loader valve and what you use to control the loader.
So if you have the gage, Install it in the IN port using a tee.
So if you have the gage, Install it in the IN port using a tee.
