B7200 lift probems

[tary]

Lost all lifting on my front bucket. how do i check the pump pressure.
Thanks

 

[J_J]

You can put a hyd gage in a tee in the IN port of the FEL valve.

You should do a pressure and flow check.

 

[Egon]

Is it a hydrostatic and does it have more than one pump?

 

[tary]

No it has a clutch . The 3 pt hitch seems to work fine

 

[tary]

what and where is the fel valve

 

[tary]

What is the fel valve . where is it located
thanks

 

[Egon]

What is the fel valve . where is it located
thanks

should find it under the the FEL control lever.(front end loader)

It has clutch but is the drive system hydrostatic or a geared transmission. Both systems will have a clutch.

Have you checked the oil level? How about the quick connects, have you taken them apart and put them together? Is the joystick tight or loose and sloppy. They can wear to the point the valve doesn't get actuated.

 

[J_J]

The FEL valve is the joystick loader valve and what you use to control the loader.

So if you have the gage, Install it in the IN port using a tee.