B7100D "pull to stop" knob

[monzadriver]

Hello.

In my Kubota B7100D i had knob with the print "pull to stop" on the right side.
A black triangular knob
It was fitted under the "off-handle" around next to the battery.
But i lost it (it came off while spading my land).

Maybe some-one can post some good pictures of this knob, so i can order a new one ??
Or has a partnumber for me ??

Thanx !!

 

[gwdixon]

Both Messick's and Kubota will send you drawings from their parts catalogs.

You may just have to replace it with something from the hardware store.

 

[monzadriver]

Thats nice (did not receive anything upto now)

But i also hope on 1 or 2 foto's, so i have an example for the part i am searching for.
Its easy to use a bolt orzo, but original is nicer

On some older 2-wheel equipment i own, like a Agria 3200 and a Bucher M300 mower i used orange and white bals from a proffesional Garlando footbal table.
Driled holes in it, tapped threat, and screwed it on.
But for the Kubota i hope on something original

 

[monzadriver]

Still nothing

 

[kubmehc]

I think what the problem may be is the U.S. version of the B7100 does not have that knob. The throttle is used to shut down the engine. There is a version of the fuel stop knob on other machines that is round and may be the same thread size. The part # is 35260-17160.

May also try 67800-53920 if it is a complete cable.

 

[monzadriver]

Hello

Aha, thats why in the online downloadable manuals that knob is not there.
A friend of mine ordered the service parts for my Kubi, and now there is fitted a red round knob.
I more like the original, but something is better than nothing

Along with he knob we also serviced:
New ignition lock
New engine oil and filter
New gearbox oil and filter
New airfiler
New dieselfilter
New oil in the 3 front differentials
That knob.
And a new seal and 2 new bearings for the pto.
So its ready to rock again