jasonf
Silver Member
I have a 2710 and am in the process of installing the B2761 Quick Hitch Attachment for the Front Mounted Snowblower I purchased. I have assembled everything as per the Install Manual and when I try to install the Mid PTO Driveline, it appears to be too long. I have slid the front coupling as far foward as possible (until it hits up against the rear bearing of the quick hitch subframe) and when I try to attach the rear coupler to the Mid PTO stub it is too long by about 1 inch. I have checked and rechecked the assembly diagram and it still won't fit. Anyone out there have this configuration ? If so can you uncouple your Mid PTO driveshaft without trouble ? It's getting cold here and any ideas are welcome.... Thanks !!!!
