B2710 Hydraulic Case/Tank Return

[bnold]

Have a B2710 I’d like to add a set of rear remotes to.

Have the valve with open center/Power beyond kit as well as the Kubota hydraulic piece to mount on the side of the transmission case. (Plate is removed and this piece is bolted in its place for an hydraulic in/out). Question is, I believe this plate is before the pressure relief valve in the system, so I need to use the T port on the valve to dump back to the tank.

Not sure where to do this other than the fill port on the transmission case.

Help appreciated!

 

[Dave M7040]

Have a B2710 I’d like to add a set of rear remotes to.

Have the valve with open center/Power beyond kit as well as the Kubota hydraulic piece to mount on the side of the transmission case. (Plate is removed and this piece is bolted in its place for an hydraulic in/out). Question is, I believe this plate is before the pressure relief valve in the system, so I need to use the T port on the valve to dump back to the tank.

Not sure where to do this other than the fill port on the transmission case.

Help appreciated!

If you have a loader, Tee into the Tank line of the loader valve.

Dave M7040

 

[bnold]

No loader on this one.

 

[Henro]

Starting at post #27 in the following thread There are some pictures of where I put the return to tank on my B2910, which is identical to your B2710. This is (I think)where the my loader returned to tank. Perhaps you can use this point?

https://www.tractorbynet.com/forums...r-ending-t-t-path.html?highlight=T&T+path

 

[bnold]

Found the tank return this weekend from the images in that thread, much appreciated!

 

[Henro]

Found the tank return this weekend from the images in that thread, much appreciated!

Great! You will love having rear remotes.