Mowing B2650 pining up MMM

   / B2650 pining up MMM #1  

kickervr91

New member
Joined
Jun 10, 2017
Messages
2
Location
Strongstown pa
Tractor
Kubota B2650
Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??
 
   / B2650 pining up MMM #2  
Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??

I had to adjust mine when I got it so that it would be easy to pin up. It was a couple years ago so I dont remember exactly. On one side or the other you can adjust it to make it pin up easily.
 
   / B2650 pining up MMM #3  
IIRC, I tried to "pin up" the MMM once. It was a lot of trouble and really isn't necessary if one sets the height adjuster to the locked up position.
 
   / B2650 pining up MMM
  • Thread Starter
#4  
I had to adjust mine when I got it so that it would be easy to pin up. It was a couple years ago so I dont remember exactly. On one side or the other you can adjust it to make it pin up easily.

Thank you I will look into it. I am asking because I have the backhoe installed for intermittent use.
 

Tractor & Equipment Auctions

2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
2015 KENWORTH T370 QUINT AXLE DUMP TRUCK (A51222)
2015 KENWORTH T370...
Ford Super Duty 4x4 Pickup Truck Bed (A49461)
Ford Super Duty...
2021 Interstate Tiltbed 40TDL 24 Ton T/A Flatbed Trailer (A49461)
2021 Interstate...
2017 Ram 4500 Bucket Truck (A51039)
2017 Ram 4500...
2014 GOOSENECK DRIVER SIMULATOR TRAILER (A50854)
2014 GOOSENECK...
 
Top