Mowing B2650 pining up MMM

   / B2650 pining up MMM #1  

kickervr91

New member
Joined
Jun 10, 2017
Messages
2
Location
Strongstown pa
Tractor
Kubota B2650
Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??
 
   / B2650 pining up MMM #2  
Hi all, bought a new B2650 and was wondering if it was normal for the MMM to be hard to pin up out of the way. I have to jack it up into place to install pins. Is this normal??

I had to adjust mine when I got it so that it would be easy to pin up. It was a couple years ago so I dont remember exactly. On one side or the other you can adjust it to make it pin up easily.
 
   / B2650 pining up MMM #3  
IIRC, I tried to "pin up" the MMM once. It was a lot of trouble and really isn't necessary if one sets the height adjuster to the locked up position.
 
   / B2650 pining up MMM
  • Thread Starter
#4  
I had to adjust mine when I got it so that it would be easy to pin up. It was a couple years ago so I dont remember exactly. On one side or the other you can adjust it to make it pin up easily.

Thank you I will look into it. I am asking because I have the backhoe installed for intermittent use.
 

Tractor & Equipment Auctions

WEATHERFORD MP-10 TRIPLEX MUD PUMP POWERED BY A CATERPILLAR 3412 ENGINE (A50854)
WEATHERFORD MP-10...
2015 CATERPILLAR D6T LGP CRAWLER DOZER (A51242)
2015 CATERPILLAR...
2015 KUBOTA 1140CRX RTV (A51406)
2015 KUBOTA...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
2015 SkyJack SJ86T 4x4 86ft Telescopic Boom Lift (A49461)
2015 SkyJack SJ86T...
1994 FORD F450-SUPER DUTY FLATBED (A51219)
1994 FORD...
 
Top