ASV RC-100 Starter Relay issues...

[redpeppers]

So my ASV RC-100 has a problem at the fuse box/panel. I recently purchased this machine for a decent price but the slot for starter relay has degraded from what i believe was caused by hydraulic fluid getting into and on the fuse panel. I got a fuse panel cover but the damage is already done. So basically in a nutshell i can not put the micro starter relay in the slot it is suppose to go into at the fuse box. Does anyone have a wiring diagram for this machine so i can look at how to bypass the starter relay and install my own relay?.

 

[Industrial Toys]

I just worked on a friends TEREX tracked loader. Is that the same family?

Why would oil wreck the fuse panel? Spraying a good zero residue cleaner into the sockets should clean them. On this machine, one fuse position was bad and had been moved to an unused position. I think, someone tried to JAM in a fuse out of position and bent the socket. I did find schematics on line, but they are a nightmare to follow. Was thinking about taking the PDF to a printer to make a large print, but could not get that done in color and that is a helpful feature of the drawing.

Apparently these machines are not great for their electrics and some end up in flames!

 

[redpeppers]

I believe it is in the same family. I am not sure for certain it was from the hydraulic fluid but the socket is damaged beyond repair. I would have to replace the whole fuse assembly box to fix it hence the reason I would like to wire up my own relay. I have search quite a bit and have found no schematics.

 

[Industrial Toys]

The schematic I found was actually on this site. It's hard to find anything on here via a search, almost impossible. It' really too bad.View attachment PT-70 80 electrical schematic.pdf