tallyho8
Elite Member
- Joined
- Aug 1, 2004
- Messages
- 4,543
- Tractor
- Kubota L4400, Kubota ZD326
Another WHAT"S THIS?
- Thread starter tallyho8
- Start date
- Views: 1648
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 19,898
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
IT looks to me like a blade for brush cutting. How big a diameter? Perhaps it's an early drum mower blade.
pjbci
Platinum Member
- Joined
- Feb 10, 2012
- Messages
- 780
- Location
- Summit. Ms
- Tractor
- JD 4840, Deere 5075e, 450j, Cat D4k2, Kobelco 160, Volvo EC140el, deere 310, komatsu D31px22, IH 1486, MF 135, MHF TO35
Maybe a spinner plate for a fertilizer spreader truck. Judging from small bolt hole and pattern I dont think its heavy enough to be a cutter of any kind.
pjbci
Platinum Member
- Joined
- Feb 10, 2012
- Messages
- 780
- Location
- Summit. Ms
- Tractor
- JD 4840, Deere 5075e, 450j, Cat D4k2, Kobelco 160, Volvo EC140el, deere 310, komatsu D31px22, IH 1486, MF 135, MHF TO35
Or possibly a chaff spreader plate off of a combine.
OP
tallyho8
Elite Member
- Joined
- Aug 1, 2004
- Messages
- 4,543
- Tractor
- Kubota L4400, Kubota ZD326
It's about 24 inches wide and made of metal about 1/16" thick.
sixdogs
Super Star Member
- Joined
- Dec 8, 2007
- Messages
- 13,522
- Location
- Ohio
- Tractor
- Kubota M7040, Kubota MX5100, Deere 790 TLB, Farmall Super C
If you are in a treed area I'd say it could be the wheel off a tree seedling planter. Just a guess but I have seen similar and that's what they were and used for planting and spacing small seedlings.
Last edited:
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 19,898
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
The holes around the circumference look like rivet holes for more "blades" to be added. Could it have something to do with sprigging rice?
2LaneCruzer
Super Member
It almost looks like a disc from a corn planter or some such.