Adding rear hydraulics to L2250

[bjorn773]

I'll have to pull up the parts manual again, but I thought it showed 2 orings, one for each port. I'll check and post back.

 

[Leejohn]

Yes thats it. I was wrong about the olong oring, it has 2 orings the oil must pass into that cover and back out. Go to page 114 and you can see the 2 orings under that cover. Also if you hook in there you well not be able to use the remote valve and the 3pt at the same time. That part I think would be the same even if you pick up your hyds from the hyd block.

That is what I said in this post

 

[Jdl2250]

I vaguely recall that from the manual... I'll have to read it again.

Let us know