Loader Add a cutting edge or not?

[rkidd]

Does anybody have a good brand/place for me to start my search?

What I did was to go to my Kubota dealer and order one for a bigger tractor as they did not make one for my 60 inch bucket, then after I drilled the holes and bolted it on I cut it off to fit.

 

[charlton289]

I checked with my local Cat dealer sometimes they have take offs and they just replace and the old one is still good on one side. And they just give away instead of wasting time to take to scrap yards. I would also check with rental places like united rental or Sunbelt rentals they might have one also

 

[oosik]

My tooth bar is made by Rankin and I ordered it thru the local Kubota dealer. Price - $395. You might also try the county or state highway maintenance departments - their used/discarded cutting edges would have plenty of use remaining as a bucket cutting edge.

 

[Egon]

Cutting edge is generic. You can order by the foot in a size you want. Make sure it's at least 1/2 in. For good results.

Farm equipment dealers, steel supply places should be able to order what you want.

 

[bfisherman11]

I went with the piranha. Have not used it much but it looks like a heavy duty product.

Bill

 

[ehinson]

I went with the piranha. Have not used it much but it looks like a heavy duty product.

Bill

Bill, what loader is on your 3033H and what size did you order for it?

 

[TemporaryKubotaOwnerMark]

I went with the piranha. Have not used it much but it looks like a heavy duty product.

Bill

I have one on my BX25. If you are going to dig dirt, it's pretty much a necessity. If you are just moving light stuff like mulch, probably not needed.

 

[ovrszd]

The bucket has a different life with a heftier cutting edge, skid shoes underneath and the leading edge of the bucket reinforced with cutting edge.

Cutting edge comes in different size's so make sure you go heavier and leave about an inch extended at each end. Makes for better cutting/catching stuff like roots or garage doors.

I don't care who you are, that's funny!!!!!