Adapting Model 67 loader for quick-change buckets

[jejennings]

Has anyone successfully adapted a 1987 JD Model 67 loader to take quick-change buckets? The boom arms look about the same distance apart as later loaders and I[m wondering if anyone sells castings that will bolt up to the boom and cylinders.

 

[jthibodeau89]

The 300x cast brackets may work. See post on converting the model 80 loader. Not sure if it will work on the model 67. The D120 kit is deere p/n BW15939. You will also need new style pins. I upgraded my 430 loader with the current cast holders and links. It was a direct fit, though I made my own pins as deere gets over $50 ea, and i needed 10 of the short pins as well as the long timing pin. I like the grease zerk in the head of the pin. Total for pins alone was $750. Found my holders on eBay for $100 ea, shipped. Looks like hayspears.com can also make a QD frame to fit your loader that accepts current JD 1-4 size implements.

https://r.tapatalk.com/shareLink/to...&share_fid=37868&share_type=t&link_source=app