AC Question

   / AC Question #1  

Toddfromtexas

New member
Joined
Sep 25, 2025
Messages
2
Tractor
Massey Ferguson 3660
Recently purchased a 94' 3660, air blows but not cooling. Cleaned coils, Compressor is kicking in and cycles when temp. is adjusted.
I am looking to check freon levels, but only finding 1 fitting on the back side of the Sanden compressor. Should there be 2 a high and low side if so where an I missing the other fitting.
Thanks
 
   / AC Question #2  
Recently purchased a 94' 3660, air blows but not cooling. Cleaned coils, Compressor is kicking in and cycles when temp. is adjusted.
I am looking to check freon levels, but only finding 1 fitting on the back side of the Sanden compressor. Should there be 2 a high and low side if so where an I missing the other fitting.
Thanks
I haven't seen a system that did not have both fittings for your gauges. Normally, the high side pressure line should be the smaller line going to the compressor and the suction (low pressure) side should be the larger line. Try tracing those lines backwards from the compressor and see if you don't find a separate fitting in each line somewhere in the plumbing. Not so easy to find in some set-ups...
 
   / AC Question
  • Thread Starter
#3  
Thanks, I am in the process of tracing lines.
 

Tractor & Equipment Auctions

New Swict 66" Skidloader Bucket (A50775)
New Swict 66"...
UNUSED FUTURE FT13CJ EXCAVATOR (A54756)
UNUSED FUTURE...
UNUSED RAYTREE RMDM72 - 72" HYD DRUM MULCHER (A54757)
UNUSED RAYTREE...
2016 Dodge Charger SRT Hellcat Sedan (A55758)
2016 Dodge Charger...
2011 INTERNATIONAL DURASTAR 4300 M7 BUCKET TRUCK (A51406)
2011 INTERNATIONAL...
2013 Jeep Patriot Sport 4WD SUV (A53424)
2013 Jeep Patriot...
 
Top