Quick Hitches A Couple Quick Hitch Questions

[LouNY]

Thanks! Without the pictures in the manual I couldn't wrap my head around what was happening. Now it makes sense. I can make a couple plates up that will do that just fine.

I have a set I made when I was using a quick hitch, 2 pieces of flat stock with 2 holes in each.
I cheated a bit when I made mine, I cut the two pieced of flat stock then tack welded them together ground and rounded the ends with them tacked together and drilled the holes thru them then ground off the tack welds. No concerns about measuring being off a 32 or anything.

 

[MESSMAKER]

Just make you some out of good grade steel pipe, I did! Have lasted for many yrs!

A piece of pipe,a bent washer and a hitch pin work well.