kenacp
Bronze Member
Would a late model 770 w/std trans.4wd, pull a 5' bush hog? What is the lift cap. on the FEL? Thanks, Kenny
770 bushhog?
- Thread starter kenacp
- Start date
- Views: 6672
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
You've got 20 PTO HP and 3PH lift capacity of around 800 lbs.
So, yes you can use a 5' cutter (I did with the 770's little brother, the 670).
You will need front weights or a loader installed to counterbalance the cutter's weight. If the brush is thick or the tractor bogs, you'll have to slow down or make a partial width pass in heavier growth.
So, yes you can use a 5' cutter (I did with the 770's little brother, the 670).
You will need front weights or a loader installed to counterbalance the cutter's weight. If the brush is thick or the tractor bogs, you'll have to slow down or make a partial width pass in heavier growth.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
kenacp said:
Right around 700 lbs at max height, if you have adequate ballast on the 3PH (loaded tires are not adequate ballast).
