72" Piranha Tooth Bar Install and Review!

   / 72" Piranha Tooth Bar Install and Review! #61  
My Kioti bucket has several holes pre-drilled along the cutting edge. My only guess is Kioti makes a bolt-on for the bucket. Yes? Tooth-bar or something else?

Those are for the bolt on replaceable optional cutting edge.
 
   / 72" Piranha Tooth Bar Install and Review! #62  
Those are for the bolt on replaceable optional cutting edge.

I don't see this on the Kioti web site. Is it just another straight-edge for when the factory edge is destroyed?
 
   / 72" Piranha Tooth Bar Install and Review! #63  
Just ordered my PTB from Harry. 65" wide. Feel like a kid at Christmas. Oh the anticipation.
 
   / 72" Piranha Tooth Bar Install and Review! #64  
I don't see this on the Kioti web site. Is it just another straight-edge for when the factory edge is destroyed?

Yes it is just a straight edge.. your dealer should be able to price that for you.
 
   / 72" Piranha Tooth Bar Install and Review!
  • Thread Starter
#65  
Both the RR and Piranha sound like great tools. From the design, it seems the Piranha would need to be removed far less often - and it does at least "some" of the same tasks as the RR.

Yes I think that's a very accurate statement.
 
   / 72" Piranha Tooth Bar Install and Review!
  • Thread Starter
#66  
Just ordered my PTB from Harry. 65" wide. Feel like a kid at Christmas. Oh the anticipation.

Sounds good! Hope you enjoy. So far mine has worked great... Have around 2.5 hours on it. Haven't destroyed it yet! Lol
 
   / 72" Piranha Tooth Bar Install and Review! #67  
There is great feedback in this thread. I was about to pull the trigger on a Piranha, but decided to try making one. I did it more for the fun, than really trying to save money and I think the actual Piranha tooth bars are a great deal. Here's my DIY thread in case anyone wants to check it out. Thanks again.

http://www.tractorbynet.com/forums/power-trac/310891-cheap-diy-tooth-bar.html
 
Last edited:
   / 72" Piranha Tooth Bar Install and Review!
  • Thread Starter
#68  
   / 72" Piranha Tooth Bar Install and Review! #69  
My Piranha for my Max25 came in the mail yesterday and I drilled and bolted it on. It only took about an hour. I put it immediately to work digging in the dirt and all I can say is WOW!!!!!
 
 

Tractor & Equipment Auctions

2007 JOHN DEERE 624J WHEEL LOADER (A51406)
2007 JOHN DEERE...
1993 Ford Ranger STX Ext. Cab Pickup Truck (A50323)
1993 Ford Ranger...
PORTA CABLE 150 PSI AIR COMPRESSOR (A50854)
PORTA CABLE 150...
4 1/2 150G DRILL STEM 288 JOINTS (A50854)
4 1/2 150G DRILL...
2012 MACK CHU613 (A50854)
2012 MACK CHU613...
2017-2023 Chevrolet Silverado Pickup Truck Bed (A49461)
2017-2023...
 
Top