654 temp gauge

[steve tym]

Still have not resolved this. Can't find a good location for the aftermarket without hacking up the hoses.
There is a small hose off the water pump, but I will have to pull the hose and identify the threads to install a tee. That would be the cleanest, but nobody seems to know what the threads are.

 

[jigs_n_fixtures]

Where is the idiot light sensor? Can you remove it and install a sender for a gauge.. In most applications you can. NOt sure what your thermostat housing looks like, but I have seen over height housings with a port for mechanical gauge on the bottom. And, you could probably fab a spacer with a threaded hole for a sensor, to sandwich under the stock housing.

 

[steve tym]

I'll look into that. Thanks for the suggestion.