5610 Rear 3 Point Draw Load

   / 5610 Rear 3 Point Draw Load #12  
I'd be willing to bet that in a straight-line pull type of situation that the 3 point can take as much load as the machine generates. Any off-center or jerking type of pull would be better attempted with either the receiver or another reinforced piece of structure.
 
   / 5610 Rear 3 Point Draw Load
  • Thread Starter
#13  
I'd be willing to bet that in a straight-line pull type of situation that the 3 point can take as much load as the machine generates. Any off-center or jerking type of pull would be better attempted with either the receiver or another reinforced piece of structure.
Thanks for all the comments everyone.

That's what I'm thinking. With a decent straight angle pull I'll try the 3 point first. Any odd angles I'll play it safe and use the receiver.
 
   / 5610 Rear 3 Point Draw Load #14  
I made a bone headed move a couple of years ago pulling with the 3 point hitch...
I placed a lateral load on the lower hitch arms, which snapped off the connection point on the case of the machine. Fortunately the connection point was part of the brake case and not part of the main transmission case. Still cost me $2k.
 

Tractor & Equipment Auctions

UNUSED LANDHONOR AD-12-23C HYD AUGER (A54757)
UNUSED LANDHONOR...
20167 (A55787)
20167 (A55787)
GRADALL XL3100IV MOBILE EXCAVATOR (A51406)
GRADALL XL3100IV...
Wolverine Single Cylinder Grapple Bucket Mini Skid Steer Attachment (A53421)
Wolverine Single...
kids dirt bike (A53424)
kids dirt bike...
2014 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER TRUCK (A54313)
2014 FREIGHTLINER...
 
Top