4110: Stop washing it???

/ 4110: Stop washing it???
  • Thread Starter
#81  
k54frog said:
Doug, I love it when a long term purchase is finally used:D
Does the blood match the tractor?:eek:
Unlike some of the hardcore John Deere owners around here, my blood is NOT lime green! :D

It's the regular color: Mahindra Red!!! :)

Dougster
 
/ 4110: Stop washing it??? #82  
Doug,
Did you ever find out what was causing the problem? And how is the rock job? Is it completed?

David
 
/ 4110: Stop washing it???
  • Thread Starter
#83  
resaca said:
Doug, Did you ever find out what was causing the problem? And how is the rock job? Is it completed?
David
Hi David - Guess what's at the very top of the agenda for today??? :D

Yes, the infamous "rockscape" job is complete, done, finished, demobilized and fully paid for plus a big tip. Now comes the equipment repair and reconditioning. Everything took a royal beating. It will now be interesting to see what things clean-up well and what will either need professional reconditioning or replacement. :rolleyes:

Dougster
 
/ 4110: Stop washing it???
  • Thread Starter
#85  
xlr82v2 said:
Well, let's see some pics of the battle damage! ;)
Oh Brother!!! :eek: You sadist you!!! ;)

I think you just want to enjoy the pain & agony of others!!! :p

I'll send pix alright... once everything is back to pristine perfect!!! :p

I'm even going back to the expensive "matching paint" store again... this time for flawlessly perfect (i.e., semi-worn/semi-faded) copies of Bradco's version of Mahindra Red and KMW's version of Mahindra Red!!! How is that for being ****??? :D

As far as matching Bradco's, Piranha's and CAT's versions of BBB ("basic bucket black")... I think I'll just stick with good ole Rustoleum!!! ;)

I think Bill6 would be darn proud of me!!! :D

Dougster
 
/ 4110: Stop washing it??? #86  
Dougster said:
Oh Brother!!! :eek: You sadist you!!! ;)

I think you just want to enjoy the pain & agony of others!!! :p

I'll send pix alright... once everything is back to pristine perfect!!! :p

I'm even going back to the expensive "matching paint" store again... this time for flawlessly perfect (i.e., semi-worn/semi-faded) copies of Bradco's version of Mahindra Red and KMW's version of Mahindra Red!!! How is that for being ****??? :D

As far as matching Bradco's, Piranha's and CAT's versions of BBB ("basic bucket black")... I think I'll just stick with good ole Rustoleum!!! ;)

I think Bill6 would be darn proud of me!!! :D

Dougster

Dougster, now, there's no need to be shy... we're all adults here, there's nothing to be ashamed of. We can handle it... it's totally natural... it's probably nothing that we haven't seen before. Come on now, open up, let us see...;) :D :p
 
/ 4110: Stop washing it???
  • Thread Starter
#87  
xlr82v2 said:
Dougster, now, there's no need to be shy... we're all adults here, there's nothing to be ashamed of. We can handle it... it's totally natural... it's probably nothing that we haven't seen before. Come on now, open up, let us see...;) :D :p
Nothing to see here folks... just move along... please move along. :D

Dougster
 
/ 4110: Stop washing it??? #88  
Dougster said:
Oh Brother!!! :eek: You sadist you!!! ;)

I think you just want to enjoy the pain & agony of others!!! :p

I'll send pix alright... once everything is back to pristine perfect!!! :p

I'm even going back to the expensive "matching paint" store again... this time for flawlessly perfect (i.e., semi-worn/semi-faded) copies of Bradco's version of Mahindra Red and KMW's version of Mahindra Red!!! How is that for being ****??? :D

As far as matching Bradco's, Piranha's and CAT's versions of BBB ("basic bucket black")... I think I'll just stick with good ole Rustoleum!!! ;)

I think Bill6 would be darn proud of me!!! :D

Dougster

Brian,
I know where he lives. I'll sneak over there tonight and get the pictures that everyone wants to see. :eek:
 
/ 4110: Stop washing it???
  • Thread Starter
#89  
civesnedfield said:
Brian, I know where he lives. I'll sneak over there tonight and get the pictures that everyone wants to see. :eek:
Et tu Ed??? Et tu??? :(

By the way, did you see the 4530 up for grabs at a certain large unmentionable auction website??? :) Better watch out or I'll buy it just so you can't pick on me and my 4110 anymore. :D

Dougster
 
/ 4110: Stop washing it??? #90  
Dougster said:
Et tu Ed??? Et tu??? :(

By the way, did you see the 4530 up for grabs at a certain large unmentionable auction website??? :) Better watch out or I'll buy it just so you can't pick on me and my 4110 anymore. :D

Dougster


I dare you. :D Besides that I'll still pick on ya cause that one has those R4's on it.
 
/ 4110: Stop washing it???
  • Thread Starter
#91  
civesnedfield said:
I dare you. :D Besides that I'll still pick on ya cause that one has those R4's on it.
Okay for you potato farmer boy!!! Them R4's are so we city slickers can drive on paved roads and even finished lawns... something you backwoods boys maybe don't yet have too many of up there in northern Maine!!! :D

Don't push me Ed... or the "TANK" may end up with a little more direct competition!!! :p

Dougster
 
/ 4110: Stop washing it??? #92  
Dougster said:
Okay for you potato farmer boy!!! Them R4's are so we city slickers can drive on paved roads and even finished lawns... something you backwoods boys maybe don't yet have too many of up there in northern Maine!!! :D

Don't push me Ed... or the "TANK" may eend up with a little more direct competition!!! :p

Dougster


Not too worried:cool: I know that you won't be buying a larger machine anytime soon:p That is unless the price is below the basement,:rolleyes: then I know you wont be able to refuse it:cool:

So for now I know the Tank is safe:)
 
/ 4110: Stop washing it???
  • Thread Starter
#93  
civesnedfield said:
I know that you won't be buying a larger machine anytime soon:p That is unless the price is below the basement,:rolleyes: then I know you wont be able to refuse it :cool:
Dang, you already know me too well. :mad:

Dougster
 
/ 4110: Stop washing it??? #94  
Dougster said:
Dang, you already know me too well. :mad:

Dougster

Ha got ya pegged:cool: By the way when you see the camera flash in the yard, don't call the cops it's just me
 
/ 4110: Stop washing it???
  • Thread Starter
#95  
civesnedfield said:
Ha got ya pegged:cool: By the way when you see the camera flash in the yard, don't call the cops it's just me
There is nothing here to see people... MOVE ON!!! :eek:

Dougster
 
/ 4110: Stop washing it??? #96  
Dougster said:
There is nothing here to see people... MOVE ON!!! :eek:

Dougster

Come on Dougster Enquiring minds want to know:D
 
/ 4110: Stop washing it???
  • Thread Starter
#97  
civesnedfield said:
Come on Dougster Enquiring minds want to know:D
All kidding aside, there is really not that much to see. The new CAT bucket and the Piranha grapple took bad beatings moving all those giant mega-rocks, but that's what they were bought for. It's just funny to compare pre- and post- "rockscape" conditions since the CAT bucket, in particular, had never been used by me before this job and the Piranha grapple had only seen relatively light wood and brush-moving duty. Now the CAT bucket looks like a veteran skidsteer bucket should... and the grapple will need some serious straightening and reconditioning, possibly by a third party (read: a welder).

The worst beating was taken by the 18" backhoe bucket and, to a lesser degree, by the new backhoe thumb. Both are beat to a pulp. The bucket now needs all new teeth and maybe new cutting edges front and both sides. It might be better to simply replace the bucket with a new one... reconditioning and keeping this old bucket should another insane monster rock job come along. :eek:

The bucket cylinder rod was badly scratched while digging under a 7,500 lb rock trying to deep bury it. No big leaks yet, but it will be replaced this winter. My bad... and I intend to remedy it. Very embarrassing. :(

The FEL and numerous other parts of the backhoe took a lot of superficial damage, but I'll also want to inspect both for cracks before reconditioning and repainting. Parts that can't be dressed up to my satisfaction will be replaced. The tool carrier will get updated courtesy of Jeremy and KMW.

The tractor itself is leaking in a few new places. I'll be investigating those new leaks tomorrow. I may (read: should) replace the hydraulic oil and filters early as well due to the defective grapple cylinders. God only knows what is sitting there inside the filter. :rolleyes: The tires did not do so bad on this job. Other jobs have been much worse on the tires. The tractor is still filthy beyond words and EVERY obscure fitting needs to be re-greased and then re-greased again, but other business and personal issues had to take precedence this week. Bill6: Please don't look. :eek:

I need to take the old defective cylinders off the Piranha grapple. New ones have already arrived... a little beat up, but still usable. This is gonna be an oily, messy job for me and the GF this weekend. No fun at all. Measurements for the new thumb hydraulics will also be taken so that I can finally get that project underway.

After the obvious damage is fixed, I need to take a hard look at everything that didn't break or get damaged. I am very concerned about the FEL hoses, which look to have been over-stressed and weakened by this crazy mega-rock job. I also need to confirm proper hydraulic system operating pressure and get it adjusted if it is set a bit too low (as suspected).

Dougster
 
/ 4110: Stop washing it??? #98  
Dougster said:
Unlike some of the hardcore John Deere owners around here, my blood is NOT lime green! :D

It's the regular color: Mahindra Red!!! :)

Dougster

:D :D :D I think I like this guy:D :D :D
 
/ 4110: Stop washing it??? #99  
Dougster said:
All kidding aside, there is really not that much to see. The new CAT bucket and the Piranha grapple took bad beatings moving all those giant mega-rocks, but that's what they were bought for. It's just funny to compare pre- and post- "rockscape" conditions since the CAT bucket, in particular, had never been used by me before this job and the Piranha grapple had only seen relatively light wood and brush-moving duty. Now the CAT bucket looks like a veteran skidsteer bucket should... and the grapple will need some serious straightening and reconditioning, possibly by a third party (read: a welder).

The worst beating was taken by the 18" backhoe bucket and, to a lesser degree, by the new backhoe thumb. Both are beat to a pulp. The bucket now needs all new teeth and maybe new cutting edges front and both sides. It might be better to simply replace the bucket with a new one... reconditioning and keeping this old bucket should another insane monster rock job come along. :eek:

The bucket cylinder rod was badly scratched while digging under a 7,500 lb rock trying to deep bury it. No big leaks yet, but it will be replaced this winter. My bad... and I intend to remedy it. Very embarrassing. :(

The FEL and numerous other parts of the backhoe took a lot of superficial damage, but I'll also want to inspect both for cracks before reconditioning and repainting. Parts that can't be dressed up to my satisfaction will be replaced. The tool carrier will get updated courtesy of Jeremy and KMW.

The tractor itself is leaking in a few new places. I'll be investigating those new leaks tomorrow. I may (read: should) replace the hydraulic oil and filters early as well due to the defective grapple cylinders. God only knows what is sitting there inside the filter. :rolleyes: The tires did not do so bad on this job. Other jobs have been much worse on the tires. The tractor is still filthy beyond words and EVERY obscure fitting needs to be re-greased and then re-greased again, but other business and personal issues had to take precedence this week. Bill6: Please don't look. :eek:

I need to take the old defective cylinders off the Piranha grapple. New ones have already arrived... a little beat up, but still usable. This is gonna be an oily, messy job for me and the GF this weekend. No fun at all. Measurements for the new thumb hydraulics will also be taken so that I can finally get that project underway.

After the obvious damage is fixed, I need to take a hard look at everything that didn't break or get damaged. I am very concerned about the FEL hoses, which look to have been over-stressed and weakened by this crazy mega-rock job. I also need to confirm proper hydraulic system operating pressure and get it adjusted if it is set a bit too low (as suspected).

Dougster

Dougster,
The way you describe it, you need to take it out back and shoot it.:eek: I still wanna see a photo of that cat bucket.
 
/ 4110: Stop washing it???
  • Thread Starter
#100  
bindian said:
Dougster, The way you describe it, you need to take it out back and shoot it.:eek: I still wanna see a photo of that cat bucket.
Oh Lordy! Yesterday would have been the perfect day to shoot a photo of the 545 lb, 66" CAT bucket. It got a good, long pressure wash... but then I had to take it off, store it and remount my light-duty bucket and trailer hitch attachment so I could move around my trailers. :rolleyes: Dang!!!

The "rockscape" job was a bit much for the 4110/ML112/509. It really should have been attacked first with a commercial backhoe and/or track excavator. It certainly would have been a lot better if I had borrowed your "Big Red Beast"... but you are way too far away. ;)

Dougster
 

Marketplace Items

LandHonor LHR-UBF12 12in Utility Blower Fan (A60352)
LandHonor...
167 (A52708)
167 (A52708)
832653 (A61165)
832653 (A61165)
2014 International WorkStar 7300 4x4 Altec AA55E 55ft. Material Handling Bucket Truck (A60460)
2014 International...
LandHonor LHR-SBC19 19 Gallon Portable Sand Blasting Cabinet (A60352)
LandHonor...
2008 Lexus IS250 Sedan (A61569)
2008 Lexus IS250...
 
Top