3110D - GPM?

[Republic of Texas]

How many GPM does thw hydraulic pump put out on the 3110D?

I'm looking to add remotes & so I need to know which control valves to buy.

 

[winston1]

Hoye sells this pump for your tractor without power steering. Do you have power steering? I believe it is rated at 9cc. HYDRAULIC PUMP: Yanmar Tractor Parts I believe that translates to 5.7gpm at 2400rpm. Not sure whether your original pump puts out that much or not . I suspect it has a tag on it showing the cc's. Might take a look.

 

[Republic of Texas]

If I were to add more remotes & control valves, do the control valves have to be rated for 5.4 GPM?

Or, can I use a valve that is rated for higher GPM?

 

[kenmac]

You can use one rated for higher. (8GPM I believe)I added a grapple valve. it works just fine. I think it's just saying it won't handle anymore than 8 GPM

 

[Republic of Texas]

You can use one rated for higher. (8GPM I believe)I added a grapple valve. it works just fine. I think it's just saying it won't handle anymore than 8 GPM

Thanks kenmac!

Would you happen to have some pics & info on how you added the grapple?

 

[kenmac]

Thanks kenmac!

Would you happen to have some pics & info on how you added the grapple?

There on here somewhere. I'll see if I can dig them up

 

[winston1]

If you click on Kenmac's name and then on his threads you can likely find them.

 

[kenmac]

http://www.tractorbynet.com/forums/yanmar/220534-grappel-update-thumb.html?highlight=

See if this helps

 

[Republic of Texas]

http://www.tractorbynet.com/forums/yanmar/220534-grappel-update-thumb.html?highlight=

See if this helps

That's awesome Ken! I was reading through your plumbing issues & fixes in that thread. I guess I'm gonna have fun when it comes time to figure it all out.

Thanks for the link!

 

[kenmac]

If I figured it out, anyone can. What loader do you have ? Does the loader valve have a PB port. You would have to be able to get a PB sleeve for the loader valve.