3 point hitch

[DAN LANG]

.....thought I was missing a piece from the handle.......but now the hitch is in the up position and I can get it to come down ???.....I could move it up and it would go back down while moving a handle that is attached to the chassis......any ideas

 

[SPYDERLK]

Look for a round knob under or beside the seat. Turn it counter clockwise one turn. It should turn fairly easy by hand. ... Fixed?

 

[DAN LANG]

.....thought I was missing a piece from the handle.......but now the hitch is in the up position and I can get it to come down ???.....I could move it up and it would go back down while moving a handle that is attached to the chassis......any ideas

...no ...that didn't do anything....that controls the speed ........its like it stuck...

 

[Navasot]

Have you put down pressure on it? Will it go down after sitting a while?

 

[DAN LANG]

Have you put down pressure on it? Will it go down after sitting a while?

No....there is some linkage I think that is missing

 

[Navasot]

Linkage were? Inside the lift housing or external? So it has not moved since it got locked up in position?

 

[SPYDERLK]

.....thought I was missing a piece from the handle.......but now the hitch is in the up position and I can get it to come down ???.....I could move it up and it would go back down while moving a handle that is attached to the chassis......any ideas

No....there is some linkage I think that is missing

I dont understand your chain of events.

 

[oldpilgrim]

...no ...that didn't do anything....that controls the speed ........its like it stuck...

I had the same problem.....I just wasn't opening the valve far enough. When I did, it went down just fine.

 

[DAN LANG]

.....................There is a handle that sticks out of the fender....that connects to something ..not sure what.........there is a lever...external...that I can move ...if I pull it ..the hitch goes up...and if I let it go...it will go down....

I guess is there are 2 things that effect the up and down of the hitch...

 

[oldpilgrim]

you should have a round black knob on the riser that the seat is fastened to. Reach down between your legs towards the floor and there it is. That's what needs opening.

 

[Navasot]

.....................There is a handle that sticks out of the fender....that connects to something ..not sure what.........there is a lever...external...that I can move ...if I pull it ..the hitch goes up...and if I let it go...it will go down....

I guess is there are 2 things that effect the up and down of the hitch...

So you have fixed your problem then

 

[Navasot]

OHHHH you mean it goes down on its own??

 

[Navasot]

http://parts.mahindrausa.com/dealerview/illustrationview.aspx

this is the only lever to operate the 3pnt... if your letting go and the lever is falling back down causing the 3pnt to let down then check all your connections and springs to be sure one hasn't gave out

 

[SPYDERLK]

.....thought I was missing a piece from the handle.......but now the hitch is in the up position and I can get it to come down ???.....I could move it up and it would go back down while moving a handle that is attached to the chassis......any ideas

No....there is some linkage I think that is missing

.....................There is a handle that sticks out of the fender....that connects to something ..not sure what.........there is a lever...external...that I can move ...if I pull it ..the hitch goes up...and if I let it go...it will go down....

I guess is there are 2 things that effect the up and down of the hitch...

OHHHH you mean it goes down on its own??

,,,,,,,,,:confused3:
I dont understand the chain of events.

 

[Navasot]

quite misleading

 

[LD1]

Pictures?

 

[SPYDERLK]

Pictures?

Translations?

 

[LD1]

Translations?

Pictures are a universal language:thumbsup:

OR at least I hope in this case