nestorint
New member
Hello everybody. I am a new member and just last week bought a used Kubota ZL1-202. Dealer gave me old, looks like 3 point quick hitch connector . Is this correct?
3-Point Hitch 3 point hitch connector
- Thread starter nestorint
- Start date
- Views: 2687
Leejohn
Elite Member
I wouldn't use it because you can't use a pto shaft with it on.
You right. Than if I cut central brucket in the middle so it will not interfere with PTO. It may work. Except it may compromise rigidity of this "contraption" 
This is my tractor. Difficult to believe its 30 years old. Gray import from Japan. Japanese do take care of their machineries
This is my tractor. Difficult to believe its 30 years old. Gray import from Japan. Japanese do take care of their machineries
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,616
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
If that's a quick attach bracket, why did they move the lower hooks so far inboard? If the one on the right in the photo is as far in as the one on the left (hard to see in the photo), then that thing looks as though it's designed to put implements designed for a subcompact tractor on to a CUT.
BTW, isn't that opening below the center of the cross brace high enough to allow the PTO to pass through? I guess it might depend on what kind of implement you are using.
BTW, isn't that opening below the center of the cross brace high enough to allow the PTO to pass through? I guess it might depend on what kind of implement you are using.
k0ua
Epic Contributor
I am not certain what that "contraption" is. it might be part of some kind of implement.
Citydude
Super Member
It looks like a thingamajig. Used on a 3 point hitch to attach a whatyamacallit.
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 816
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
Bingo. We have a winner.
I agree it looks like part of another piece of equipment just the way the lower hooks are so close together.
WranglerX
Super Member
That was my first thought, certionally not a "quick hitch", believe the rest of the impliment it was used with is missing.... Might be a good "connector" if one were to mod it into a rear ballast or "work" platform/box though...
Probably a "bonus" part to sweeten the deal as dealer wanted to get rid of it becauseit was in the way and he could not find any use for it....
Dale
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 816
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
I was thinking it was from a old 3pt scoop bucket.
ptsg
Super Member
Proprietary hitch for proprietary tillers that Kubota uses on rice farming countries like Vietnam, Taiwan, and so on. Proprietary hitches used to be quite common on those older grey market tractors. This quick hitch in particular, would most like work with another proprietary attachments.
Can be barely seen here (white thingy):
Can be barely seen here (white thingy):