3 point hitch bushing material

[sleepy orange]

Hi looking for 7/8'' id x 1 1/8'' od to make bushings from any info would be great thanks Mark

 

[Gordon Gould]

Here's one place. Didn't try TSC but they probly have them too.

Lift Arm Reducer Bushings - 1 1/8" D x 7/8" I.D. x 1 3/4" L

These lift arm reducer bushings are used in the pin hole of a lift arm to allow a small category pin to fit.

www.qcsupply.com

gg

 

[sleepy orange]

the ones i need are 2'' long i have a new evolution saw to cut them with

 

[kabong57]

They are available through any Stens dealer

2 Pack of Stens 3013-1492 Atlantic Quality Parts Lift Arm Bushing 1 1/32 | eBay

Atlantic Quality Parts Lift Arm Bushing. Alien Hardware (Parts Pal LLC). We promise to provide the best solution to your issue in the quickest way possible! Category: 1 or 2. Leaf Blowers & Vacuums Parts.

www.ebay.com

You do need to verify the part dimensions before ordering. Seems a shipment of the wrong size bushing have been imported with this part number.

 

[Tinhack]

I couldn't see buying bushings or those expensive adapters for every attachment I have or will get. The adapters seem to be a recent invention designed as a wallet buster.

I took some 1x1/8" flat steel I had and made two U-shaped open sleeves for my quick hitch. I tack-welded those to the quick hitch and problem was solved and well under budget. When/if they wear out, I can cut the welds loose and make two more. I'm betting they'll out live me though.

 

[workinonit]

That's a good idea but it still leaves a gap at the top for the implement pin to beat around in.

 

[Sberry]

Those bushings are something we stock,,, we build all kinds of stuff with them, they are quite reasonable.

 

[Gordon Gould]

McMaster Carr - They also have harder tubing

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

gg

 

[WranglerX]

Quick and dirty way would be 1 inch water pipe.....

 

[bcp]

Pipe ID and OD.

SCH 40 Bare & Black Standard Steel Pipe On ANS Steel Co.

Browse SCH 40 Bare & Black Standard Steel Pipe in the ANS Steel Co. catalog including Item #,Size,Outside Diameter,Inside Diameter,Wall Thickness,Weight per Ft.

products.anssteel.com

Bruce

 

[sleepy orange]

Thanks everyone for all your help Mark