3 Point hitch air compressor
- Thread starter hydrovane218
- Start date
- Views: 22071
JRL305
Silver Member
Wow, that's where Harley got their idea from.
George2615
Super Member
I think it's a good idea and there is probably a market for it.
I have a similar setup to what Eddie W. uses just a little bigger. I use a Miller Bobcat welder / generator for electric for power tools and / or welding in the field. Also have a 6HP 33 gallon air Sears compressor that will run multiple air nailers, impact gun, paint sprayer, portable sand blaster, cut off tool, etc. It runs at 135 PSI and only 6.4 SCFM @ 90# but has run everything I mentioned. I would consider building a 3 pt. driven compressor myself if I ever ran across a large enough compressor with a bad motor but really don't have a need or enough use for one.
I have a similar setup to what Eddie W. uses just a little bigger. I use a Miller Bobcat welder / generator for electric for power tools and / or welding in the field. Also have a 6HP 33 gallon air Sears compressor that will run multiple air nailers, impact gun, paint sprayer, portable sand blaster, cut off tool, etc. It runs at 135 PSI and only 6.4 SCFM @ 90# but has run everything I mentioned. I would consider building a 3 pt. driven compressor myself if I ever ran across a large enough compressor with a bad motor but really don't have a need or enough use for one.
RitchElbe
Gold Member
If you need a way to justify this TATER CANNON!!! it is that time of year of Chunkin!!
