1999 JD 445 70000+ Control Module

Bigalc · Feb 17, 2019

I have a 1999 JD 445 70000+ with a three solenoid Control Module. Having trouble with the RIO circuit where as pulling up on the yellow RIO switch does not allow to mow in reverse. I bought new solenoids, just need to know which one on the card does what. Schematic shows which circuit the RIO is on, but doesn't show location of each component.
Yes, replaced the yellow RIO switch already. Cleaned all terminals on control module. The frame mount RIO switch was tested and works.
Thanks in advance.

Richard001 · Feb 17, 2019

Bigalc said:
I have a 1999 JD 445 70000+ with a three solenoid Control Module. Having trouble with the RIO circuit where as pulling up on the yellow RIO switch does not allow to mow in reverse. I bought new solenoids, just need to know which one on the card does what. Schematic shows which circuit the RIO is on, but doesn't show location of each component.
Yes, replaced the yellow RIO switch already. Cleaned all terminals on control module. The frame mount RIO switch was tested and works.
Thanks in advance.

Welcome to TBN
:welcome:

Give us a little more info here. Did you just acquire this machine or you have had it for some time and the RIO always worked, but now suddenly it stopped working?

Richard