135 Locked up on startup!

   / 135 Locked up on startup! #11  
Ok Which one is the gearbox filler hole? I just tried again and as soon as you feel some resistance in the clutch i can turn the engine over. In the top 1/3rd of travel i'd say. That and the fact that i was able to roll the tractor with my trucks help tells me its not stuck in a gear. I think?
I think you locked it in gear AND sheer the sheersleeve that connect the box to the diff ?
 
   / 135 Locked up on startup!
  • Thread Starter
#14  
I wouldn't be able to roll it if it was locked in gear though right? I took this pic through the hole. It appears to move between gears ok. This pic is neutral.

20180422_162628_resized.jpg
 
   / 135 Locked up on startup!
  • Thread Starter
#16  
Yes for the left rail!
And the big gear ?

The one on the left of the pic? It moves back and forth with the lever. And i'm in Belleville, Ontario Canada.
 
   / 135 Locked up on startup!
  • Thread Starter
#19  
Hey ya still :( Check this out. I found these marks / cracks with a Borescope. This is looking forward from the fill hole. This has to do with the Multipower I think?

20180423_170253_resized.jpg20180423_170301_resized.jpg20180423_170306_resized.jpg
 
Last edited:

Tractor & Equipment Auctions

PREVIEW DATES AND TIMES (A51572)
PREVIEW DATES AND...
2012 Freightliner M2 106 Asphalt Pothole Patcher Truck (A51692)
2012 Freightliner...
20ft Shipping Container (A51573)
20ft Shipping...
2019 CATERPILLAR 299D2 XHP SKID STEER (A51246)
2019 CATERPILLAR...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
New Wolverine Skid Steer Root Rake Bucket Attachment 34'' (A53002)
New Wolverine Skid...
 
Top