135 Locked up on startup!

   / 135 Locked up on startup! #11  
Ok Which one is the gearbox filler hole? I just tried again and as soon as you feel some resistance in the clutch i can turn the engine over. In the top 1/3rd of travel i'd say. That and the fact that i was able to roll the tractor with my trucks help tells me its not stuck in a gear. I think?
I think you locked it in gear AND sheer the sheersleeve that connect the box to the diff ?
 
   / 135 Locked up on startup!
  • Thread Starter
#14  
I wouldn't be able to roll it if it was locked in gear though right? I took this pic through the hole. It appears to move between gears ok. This pic is neutral.

20180422_162628_resized.jpg
 
   / 135 Locked up on startup!
  • Thread Starter
#16  
Yes for the left rail!
And the big gear ?

The one on the left of the pic? It moves back and forth with the lever. And i'm in Belleville, Ontario Canada.
 
   / 135 Locked up on startup!
  • Thread Starter
#19  
Hey ya still :( Check this out. I found these marks / cracks with a Borescope. This is looking forward from the fill hole. This has to do with the Multipower I think?

20180423_170253_resized.jpg20180423_170301_resized.jpg20180423_170306_resized.jpg
 
Last edited:

Tractor & Equipment Auctions

EZGO GOLF CART (A50323)
EZGO GOLF CART...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2014 Chevrolet Tahoe (A52377)
2014 Chevrolet...
ALLIANCE 480/80R42 LOT NUMBER 134 (A53084)
ALLIANCE 480/80R42...
2025 New/Unused Wolverine Auger Drive and Bit (A51573)
2025 New/Unused...
2025 New/Unused 72in Wolverine Grapple Bucket (A51573)
2025 New/Unused...
 
Top