bobjr1
New member
Tried to take the king pin out and noticed the key is welded directly to the pin any suggestions on how to get it off?
1301d King pin
- Thread starter bobjr1
- Start date
- Views: 1668
svcguy
Gold Member
- Joined
- May 30, 2005
- Messages
- 362
- Location
- West Kootenays, British Columbia
- Tractor
- Yanmar YM240D / Massey Ferguson 135 / New Holland TN75F / Pasquali 988 and 997 / Goldoni 20A, 226 and Maxter 70RS / Ferrari 76 and 85 / Holder A50 / Valpadana VMC 180 / Long 610 4WD
Are you asking how to get the king pin out or how to remove the key from it?
MJPetersen
Veteran Member
Bobjr1,
You ought to just bring up your old post rather than starting a new one. There are guys who are willing to help, but they need the context of what has been offered/tried.
As I stated in your other post "a welded kingpin is a sign that somebody bandaided it." You will need to carefully take it all apart and check each part for serviceability and repair as necessary. You can get parts and manuals as i previously posted.
Mike
You ought to just bring up your old post rather than starting a new one. There are guys who are willing to help, but they need the context of what has been offered/tried.
As I stated in your other post "a welded kingpin is a sign that somebody bandaided it." You will need to carefully take it all apart and check each part for serviceability and repair as necessary. You can get parts and manuals as i previously posted.
Mike
