10" front rims for X495

   / 10" front rims for X495 #11  
It's not about the money, it is how it is going to look. :)
 
   / 10" front rims for X495
  • Thread Starter
#12  
Thanks for the help. The tractor came with bar tires on the rear. I bought 2 used rear rims for $100. Already ordered the rear HDAP's online. I would prefer the fronts without the extra holes in the SE rims. Would the std 4wd front rim work?
 
   / 10" front rims for X495 #13  
I do not know the offset is different, the other specifications seem the same.
 
   / 10" front rims for X495 #14  
Thanks for the help. The tractor came with bar tires on the rear. I bought 2 used rear rims for $100. Already ordered the rear HDAP's online. I would prefer the fronts without the extra holes in the SE rims. Would the std 4wd front rim work?

Yes the std. 4wd rims are what you want to match your rears.
 
   / 10" front rims for X495 #16  
Hi everyone, new to the forum and have a question. I have a X485 that I purchased recently and need new tires. I really like the Carlise Field Trax HD tires. I can get 26x12-12 for the rear, but I can't find a 16x8.50-8 size for the front. There is a 16x8.50-10 size available, which could work if I could find a 10" rim for the 2wd front axle. Any ideas?
Thanks in advance.

I replaced the original 18x8.5x8 with the 18x8.5.10. rims and tires. John Deere dealer will have all the hardware numbers you will need. I didn't want to mess with it so I had the dealer make the switch. Took about a half hour. Did the change on site in the box bed of the service truck. I have attached a picture of my X485 with the 10' rims.

You mentioned 16" rims on the front of the X485 I think they come standard with 18' rims.
 

Attachments

  • IMG_0714.jpg
    IMG_0714.jpg
    1 MB · Views: 493
   / 10" front rims for X495 #17  
Hardscrabbler. Where did you get your ROPS? And do you know if it will fit a X728
 
   / 10" front rims for X495 #18  
Hardscrabbler. Where did you get your ROPS? And do you know if it will fit a X728

I got my ROPS at FEMCO Company. They are located in Kansas. You can visit their website. I think the frame for the X728 may be the same as the X485. If so it should bolt right on. You may have to contact FEMCO to determine if they have a ROPS that will fit the X728. I have heard rumors that they have discontinued this ROPS model.
 

Tractor & Equipment Auctions

2012 Chevrolet Traverse SUV (A50324)
2012 Chevrolet...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2013 VOLVO VNM DAY CAB (A51222)
2013 VOLVO VNM DAY...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
2013 John Deere 544K Articulated Wheel Loader (A50322)
2013 John Deere...
2020 CHEVROLET 2500HD CREW CAB TRUCK (A51406)
2020 CHEVROLET...
 
Top