rear remote

I installed a detent floating valve on my tractor. The 1st thing I did was get the shifter cable and handle installed. There were a total of 6 bolts to remove to get the right side "console" loose. Lower left of pic shows slot for bolt. Can see location for top 2 bolts. Had to pop off plastic...

After sorting my stud situation to add my extra rear remote, I got everything bolted up tight and leak free. Mahindra has what they call a rear remote add kit, with includes the valve, fittings, levers and linkage. Everything went great until it was time to hook up the new remote. The link rod...

I'm adding a second rear remote to my Mahindra 2665, and I will need longer studs to accommodate the two valves. It's an M10-1.25 stud, and I'm looking for a 195-200mm stud to fit. So far, McMaster, Graingers, Fastener mart have all been fails. Does anyone know a source for long metric studs?

Perused through the old posts and didn't see an answer to my question. I am contemplating getting/putting on myself a second set of rear remotes. I use the lever in the cab down by my right leg to control the current rear remote today. If I put on another one where is it controlled from...

I am looking for a CK20 rear remote kit for my 2006 CK20. I have contacted a few Kioti dealers with no luck. I have also looked all over the Internet with no success. Any suggestions or help that anyone could provide in locating one of these kits would be greatly appreciated. Thank you!

Has anyone with a cab tractor added a Summit rear remote kit? Or similar brand? Any pics on how/where you mounted it? Thanks.

I'm wanting to install a set of rear hydraulic hookups on a 2013 Massey Ferguson 1533 tractor. I don't need any controls because most of my 3 point attachments are controlled on the 3point itself anyway. (John deere wood splitter etc). A little background on me, Ive built my own CNC plasma...

I have a 2007 Branson 4220i that the handle for the remotes valve broke, i have welded it several times, but it just break, the handle looks like pot metal, the cost for a new valve is plan to expansive. I have heard you can buy an after market valve and mount it on your fender. Has anyone ever...

Evening All, I am currently installing rear remote kit (KIOTI CKA 111) onto my CK2620. However, I've run into an issue and of course the dealer is closed until Monday. The issue lies with how to install the return line of the double acting valve. It states certain Serial #'s for the 3510/4010...

I need to purchase two male hydraulic couplers for the rear remote on my 2024 Massey Ferguson 2860m how would I find out what size these are everything I see says half inch ag coupler for sale dealership has been looking into to it for 7 days now ugh. I want to add the hydraulic top link.

I have both a JD 5300 and 5210 both with a single rear remote. The 5210 has float but the 5300 does not. Does the 5300 valve only need the longer cap to allow spool movement for float or will a longer spool be needed also?

After searching for two days I could not find a kit for the 110 TLB. I am somewhat surprised. I suspect there would be a significant demand for such a kit and there doesn’t seem to be much complexity to create one, or so I think. If anyone knows of a kit available please feel free to tell about...

On my 4820c, the rear remote #1 has a spring and ball detent system that holds the valve open until the lever is moved back to the center position. Is there a kit or parts available to convert this to the spring back to center system that the valve number 2 has?

Hello, I have a 2012 DK45 CHSE (CAB Tractor). I am trying to get a 2nd set of remotes for the rear. I currently have one set of detent remotes. Kioti has discontinued there remote kit for my tractor. A kioti dealer said they could order most of the parts individually, adding up to over...

Long post, but bear with me, I want to add rear remotes to my Kubota LX2610. Yes, I have done some research and think I have the right solution, but want to run it by folks before I do. Important to note that I already have both a backhoe and a 3rd function valve installed. The backhoe is e...

I am looking at a used tn55 here locally. It has a bush hog brand loader on the front but it runs from the one set of rear remotes. Is it hard and costly to add an extra set of rear remotes? I would love to have a 3rd function installed as well for a grapple but that may be out of the...

working on installing rear remotes on a john deere 301 a, hoping to use a generic aftermarket set up to save on cost. main issue is knowing where to plumb into the tractors hydraulics to go to the valve body. any info on how to find which ports to use would be greatly appreciated thanks

Has anybody added a 3 way valve on rear remote. I've got only 2 rear remotes and i'm thinking this would keep me from disconnecting hoses all the time. Something like that : Tractor Remote 6 Port Diverter Valve Manual, 2 into 4 ports, Blow Off Valves - Amazon Canada

I have a Hinomoto E324. I have seen pictures of them with a loader. I am looking to at least install a rear remote to run log splitter and maybe a haybine. Do anyone have one who can send me a picture or where it is plumbed into. I know there are more that one way to do it but would like to see...

Hey guys. I have a 3rd function kit installed on my Massey 1526. I want to add a rear remote to control the top link. Is it possible to just run lines to the rear and have ports like that? And then connect the top link into that? I’m assuming the diverter button on the joystick would then...

2010 Kubota L3240HST - adding a 3-point log splitter. I have no rear remotes, nor any attachments that need them. I need a Power Beyond (PB) circuit for the splitter. I am aware of loader valve options and I'm not pursuing that. @TMGT did a really nice job getting into the PB between the Front...

New to the forum here. I am looking at rear remote options for my TC35D. I'd like to stick to the factory remote if possible, though I have considered other options. I can buy the full kit through my local dealer and other outlets. However, before purchasing, I would like to see the installation...