kubota b6000

Have a older model B6000 four wheel drive and the front wheels quit driving. wondering if there is a shear pin along the driveline or do I have bigger problems. Was plowing snow and pushing quite hard. No noise, no bang, just quit pulling in the front axles.

Hi , looking for a going B6000 engine . New or used.Any leads appreciated.I am located in Adelaide Australia .

Hi all just wondering if anyone knows where to source the best prices and selsction for rear tires for a Kubota B6000. i thinnk this little unit still has the original Bridgestone "rice paddy" style AG tires on the rear. It's a 4wd and has Carlisle AG's on the front as well. When replacing the...

Hi all, new here. Recrntly acquired a B6000 with a fel and a backhoe. Found fan-belt had been replaced but somebody didn't reinstall the tensioner. When I figured this out and sort of got some tension on the belt, I see from motor running charging system doesnt seem to be working. Only 11 volts...

Hi all there may be somewhere my questions answered on here but asking for help anyway. From what I can determine after recently acquiring this little unit c/w fel and small backhoe. I've posted some pics of the unit regarding another topic as well. I think it a 1973-1977, range. My charging...

Hi all, recently acquired this unit. Tryong to find out what the steering box assembly connects to inside the transmission then to the ouput arm outside of the ttansmission. Is the oil in the transmission lunricating the gears at the bottom of the sterring box assembly. My question for asking...

Hi all, new here. Recrntly aquired a B6000 with a fel and a backhoe. Found fanbelt had been replaced but sonebody didnt reinstall the tensioner. When I figured this out and sort of got some tebsion on the belt, I see from motir running charging system diesnt seem to be working. Only 11 volts at...

Hi all I'm new here. Just acquired an older B6000 with a loader and a backhoe. I'm kinda concerned about the way the motor sounds. I'll have to figure pout how to upload a video.

Hi all I'm new here. Just acquired an older B6000 (73-77?) with a loader and backhoe. No Idea of hours as no meter on it. I just changed the oil ( was told it had been changed recently ut it was pretty black, but...) I initially googled about this model and seemingly found that the B6000 wasn't...

Hi, I';m new here. Just acquired a Kubota B6000 with loader and backhoe. Not entirely sure if thy're OEM but... I'm looking for some decent used parts if available like the headlight assemblies used, or some suitable retrofits.

I have a Kubota B6000 E with a serious issue. This tractor been down for a while. The issue is I need a 7-16 rim for it. I have contacted as of today Tractor House, Allstate, several local and non local dealers who handle Kubota. In fact I have called about every one you can think of. The rim...

I have come to know a newbie, both to Portugal and land owning. He bought about 7 acres a few months ago. A lot of olives and grapes, plus hay/grazing. He has a neighbour who appears very willing to do general cultivations with a large Ford. I have seen videos of his work (but not close enough...

PTO Reverser removed from a S370D Satoh Beaver. In excellent shape - no binding, no slop, gears are all super tight, no damage, no abuse. Adapts from 25mm/1" diameter 18-Spline reverse rotating PTO to standard 1-3/8" 6-spline PTO. Some B6000's had 10-spline PTO shafts. This will only work...

Hi all I’ve got some b6000 parts for sale would like to sell entire lot together if possible Looking for good home Not sure where to post? I’m on my phone and can’t find a for sale forum although I thought there is one? Drop me a note if interested Engine block (crank sheared) Oil pump...

Venting air from B6000, E and E-T instructions rephrased from operator's manual: 1-Fill fuel tank. 2-Loosen 2 air vent screws on fuel filter and retighten when there are no more air bubbles. 3-Loosen air vent screw on injection pump and perform same procedure used on fuel filter.

Does anyone know where a video on how to change the oil on a B6000e Kubota Tractor It's was bought in 1972 or 1977 I have the manual.

Hi, I have a Zen Noh ZB6000 which I'm told is just a B6000. It does not have the bracket on the front of the chassis rails to mount weights onto. I have been looking for weights and a bracket for the front of this little terror, and was almost going to get the mechanic to fabricate the bracket...

Hi All, this is my first post here so I hope I have it in the right forum. Apologies to those that use feet and pounds, we use metric here in the land downunder. :) We are on a 45 acre (18ha) property that we purchased a couple of years ago and are in the process of reviving after plenty of...

Hi, I am the long-term owner of a trusty B6000, recently it has developed a leak of fuel at one of the injector seals. Any advice on removing thses injectors would be great. I have new seals ready to go in, but the injectors have been in place for all of my ownership (30+years) and don't seem...

I am looking at a B6000 with mid mount mower. It appears to be in great shape but I am wondering about the quality of the grass cut it would provide.. I am coming from a lawn tractor; specifically a John Deere la145. I need a heavier tractor for plowing snow and hauling wood. The ccw pto...

Hi guys There is a old Kubota B6000E for sale locally, just tractor no attachments. My research says it's 12hp ,Runs good, nice original condition. My question is, will it pull a 900 Lb (when completely filled ) yard roller, as that is all I might use it for. Thanks in advance

Hi all, I was wondering if I could get a value on a Kubota B6000. It is a 4WD and it has a Kubota FEL on it. Also comes with a 3 pt weighted barrel for the back. Condition is very good for it's age, all hydraulics work as they should. Around 1000 hours on it. Thanks!

I neglected to put a trickle charger on my tractor for a couple of winters with very light usage during the year. When I put a charger on it this spring, it wouldn't crank fast enough to start. I have had this problem last fall, but put jumper cables on and it started right up. Today a friend...

Greetings all, I have a number of things I want to run by those who use or have used these tractors. Previously I had been contemplating a larger B2910 for my property which would be overkill for what I have now but not for a future property someday. But the weight of the B2910 would be too...

Hey ya'll, this is my 1st post. I just bought a little b6000. Told by dealer it is a US model and originaly sold here in Odessa. It has a front loader, need a little work on hydrolics and glow plugs, but most is in working condition just need a little elbow and seal work on the front end. I have...

Hi. What would be the value of a Kubota B6000? It is in excellent running condition, not rustyoverall, stored indoors, starts right up summer or winter, has brush hog and fixed plow blade. Ag Tires that are weather checked. One rear wheel is pretty rusty, may need replacing. Thanks. Seen...

The only way to bring up the rototiller up is by raising the bucket and letting it down as I hold the three point lever in raise position then releasing it. Can anyone tell me what may be at fault?

I am looking for a kabota b6000 pto reverser Please contact if available

I am looking to replace the engine of my Kubota B 6000. I am not a person with any experience in relation to diesel engines and I was wondering if former Kubota owners or diesel mechanic with experience of this model could give me some advice as the best way to go about doing this? I line in...

I am looking for the Holly Grail for a b6000 restoration. A pro reverser. Any idea's?

any info on stop bolt specs would be apprieciated. clutch does not disengage till last couple inches of peddle.

While on a hunting trip I found a B6000 with a woods belly mower. It all worked fine but while attempting to get the tractor unloaded the front PTO touched the rail on the trailer and now wont engage. Its getting voltage , wire connected , took it apart and cleaned it . NOTHING ! I slipped a...

I picked up an old Kubota B6000 last year, it has been heavily used, but motor runs great, and loader seems to function pretty well, so I'm holding on to it for now. It needs a new steering wheel, and I dont see how the old one comes off. There is a nut in center of wheel with washer and lock...

Hi All I have a grey market B6000E, is it possible to put an oil filter mount on the engine? so I can have a proper filter if so can they be found new or would it be a case of finding a wrecked one? Other one I have been pondering is what size ag tyres do people replace the riceys with...

I have a Kubota B6000 4WD.. cute little thing .. the injector pump needs adjusting and I cannot find where I can get a workshop manual or specs on how to correctly adjust the pump.. I can adjust it and it will run on 1 cylinder.. I can readjust and it will run on the other cylinder.. but cannot...

Heres my new to me B6000E, it came with a 48in belly mower, 1 bottom plow, little disk, and a cultivator. I paid $1760, was that to much?:confused:

I am looking to buy a box blade for my little B6000. I need to get some debris from the top of a dirt lot and make a small road. Is a box blade my best choice? What size would be good for my tractor? 4'? Should I get one with rippers?

Anyone have these parts for sale? PTO gasket right and left fenders hood cover clutch spring PTO reverser

Hey guys, Wondering if anyone can point me into the right direction in finding a front end loader for my Kubota B6000. Would prefer to purchase than build so anyone know where I should start? It is 4x4, 15 hp,... anything else you need to know? Thanks for your time guys! CB

I found a B6000E on craigslist with a Woods MMM for a good price but it needs a block. The guys says it had water in the oil and the block is cracked. Before I check into it more where would I find an engine or block for it? I think it has a ZL600 engine. I found some B6000's on auction time...

you can use it as a front hoe

Hi all, I have a b6000 grey market tractor with engine problems. I have come across a 2 cylinder engine for a 7000 and was wondering if anyone knows if it will fit the 6000. It's a Japanese replacement used motor that is very reasonable. I'm just not sure if it will work without a lot of extra...

Hello All, I recently purchase a very well maintained Kubota B6000 4x4 with a factory FEL and a Case Hydraulic Tiller attachment. Last week, I purchased a new small 3pt hitch on Ebay as hand splitting is not an option any longer. I have a few questions.... Does anyone now the pump size of the...

I dont have a maint/repair manual for the B6000 and maybe if I did, it would show me this.....but does anyone know what you are supposed to do as far as lubrication for the front axle pivot pin? The large single one under the engine, that supports the entire axle beam. I find it strange that...

I am trying to install an old Brantly FEL on my Kubota B6000, it was originally installed on a Iseki or something. I think the internal Hyd pump on the tractor is not up to the task for the FEL, so I wanted to try and install the external Hyd pump that was originally used for this loader. It...

I am looking for a Universal joint parts #66591-5634-5, connects the front drive spline to the universal, it striped out. Also would like the boot that covers the shaft shield, part# 66591-5717-1 If anyone has a source or older parts please let me know, i am going to need a few others too

I am having a hard time trying to find out whats wrong my 3 point will not lift anything or even make a sound like its trying . any suggestions

Hi everyone! I recently purchased a Kubota B2320 tractor and FEL. Now I have an opportunity to purchase a new Woods B6000 backhoe. The problem is that it comes with a B series frame mount and a BX series 4 point mount. Both mounts are Woods products I believe. I have the parts numbers if it...

New to the B6000, but which already has been great help in rehab. of my bushfire destroyed block in mowing and moving things around. But hydraulic/transmission oil is going milky, aerated. I've finally got a hard to read poor copy of the B6000 service manual but haven't seen any real mention...

Can anyone tell me what pressure cap I need; I believe it's 13 psi, but would like to confirm before I purchase one. Thanks

I have tried everything, but the shift handle will not move, and the tractor is stuck in 4WD. Any suggestions will be greatly appreciated. Thanks

Got a 48" box scraper for the B6000 today. Before I start working on the drive, I want to service this little tractor. Does anyone have the owners manual on PDF file? Heck I can't even find the oil filter and where you refill. How much and what oil is a mystery too. Also what does the little...

I know I know...so my wife was using my Kubota B6000. She didn't realize the wheel bolts had come loose and the next thing she knows the wheel falls off. So...the threads are shot. I have the wheel and the hub off. Do these things just unscrew? It looks like it. Where can I get new...

i have owned a b6000 for about 17-18 years now, and i can honestly say it has NEVER let me down!, i played on it and gave it quite a bit of abuse as a kid, now that im older i cherish it. it really is a legend of a tractor and the fact that so many are still working is a testament to the...

I recently picked up a B6000 with a loader, box blade and spike harrow. (I documented the saga in the Yanmar forum , where I normally hang out.) Long story short, it had some wobble in the front end that I didn't catch before I bought it. The top of the knuckle moves in and out about an inch...

I am a woman could someone help me?? Has anyone got a diagram on how to fit the deck and how to connect the belts up to the front turny thing, can supply pics, also need the size of the belt that goes from the front to the deck please please help me im stuck!! Thankyou

Hello, I recently purchased a Kubota b6000. I was very happy with it running strong on the gas it came with. Then I put some diesel in. Unfortunately it was not made clear to me that the original engine had been replaced with a WG600-B GASOLINE engine. (I should have realized this -- but I...

I've never owned a tractor in my life but I am now the pround owner of a MF 35 Diesel and a Kubota B6000. The MF works fine but the Kubota is broken. I took it to Zimmerer and they don't know what's wrong with it. They could only get it to run for 90 seconds. They did a compression test and...

I've never owned a tractor in my life and now I own two. A MF 35 Diesel and a Kubota B6000. The Kubota is out of commission and will have to stay sitting on the flatbed until I can get it fixed. But the MF works great. Any tips anyone can give me would be greatly appreciated. I'm totally...

Hi i am new to the forum. Can anyone help me. I am looking for parts for my b6000. Turf wheels and tyres, and roll bar. Also may be interested in a finishing mower, currently running a Woods topper/mower. I am based in south ease england. :thumbsup: Many thanks Colin

I ran the gas tank dry. Do I have to prime this beast to start it. If so how? Yes I'm a rookie.

I have Broken the Right Casting for the front end on my B6000 and was told by my local parts supplier that the part was unavailable. I have looked online and can't seem to find anyone who has one new or used. Looks like i have 2 options 1 is to post here and as many places as possible to see if...

I have Broken the Right Casting for the front end on my B6000 and was told by my local parts supplier that the part was unavailable. I have looked online and can't seem to find anyone who has one new or used. Looks like i have 2 options 1 is to post here and as many places as possible to see...

a new b 6000 owner

I am trying to get the tractor running for the first time since I bought it. I need info on how to get it in time. Thanks for any input

CAN ANYONE TELL ME WHY THE THREE POINT ON THE B6000 I JUST PURCHASED RAISES VERY SLOWLY WITH NO POWER? IT FEELS VERY "SPRINGY" WHEN I PUSH DOWN ON IT. IS IT A FLUID LEVEL PROBLEM? I DON'T HAVE A BOOK YET AND DON'T EVEN KNOW WHERE OR HOW TO CHECK THE LEVEL. IS THERE A LEVEL PLUG? ANY HELP WOULD...

I own a Kubota B6000. Not sure of the year but it must be in the mid 80s. I think I have one diesel injector not working or not working right. I am pretty handy but have no experience with these machines. Is there a manual available that will help me through some of the mechanicals? I also...

Hi, looking to buy a B6000 PTO reverser, Any out there?? thanks

Hi, just got a B6000 4wd, looking to make a flail mower for it, any idea how big I can go? was thinking around 40-48" thanks,

Hi guys, recently picked up my first kubota, a b6000, i love this thing....anyway, i picked up a carry all for the 3pt hitch, and have been using to move firewood.....i like to load this puppy up but when i do, the front end likes to pop up......I was wondering if there are suitcase weights that...

Does anyone rebuild B6000 starters or can you get solenoid for a starter that won't cost the price of a tractor, Has anyone had trouble with clutchs on the B6000?

I have a Kabota B6000 with 12 spines pto and I bought a bush hog with 6 spines.I have gone to a kobota dealer and he said that I have a rouge model. I have been trying to get an adapter to make this work. I have 15 acres to mow. If you have a site that I can go to, so I may purchase this item...

Help..I broke something in the front end of my Kubota B6000 when I was pushing snow with the FEL. It is a cast piece that the ring gear bolts to. Would this be considered the "center section"? or carrier? It is/was sort of bell shaped....what is the proper name for this part and does anyone...

Can anyone give me some insight on how my oil bath air filter is clogging the tractor so it wont run? if i remove the filter at least it will run, but as soon as i reassemble it, it dies. tried to clean it and put new oil in it, no dice. any thoughts?

I have a question, what is the difference between a Kubota UDT oil and a 80-90wt gear oil. I want to change the Trans. and Hyd. Before I do this I want to make sure I am not doing something stupid.:( I am working on a shoestring budget(like out of my pockets:)) Any help will be appreciated :D

My Church was donated a B6000E, But we had to get it running!Tractor had been sitting in a shed for over six years. So I took on the task. Took me a couple of days. Flushed out fuel system, cleaned air filter housing, Replaced battery with a rebuilt ($25.00) Just didn't have an extra $100.00...

Does anyone have info on the length and thickness (dimensions) of the trailing arms and top link for a B6000? Now that I have gotten the 3PH working, and have the bottom plate, and the top link bracket I just need the arm lengths to get it going. Any one got one they can measure for me...

Hope someone out there has seen this. My b6000 has a hyd valve controlled by the rear 3PH lever. It works fine when the valve is closed all the way. The FEL works great. No hissing, or hyd overload sounds. However, when opening the valve (to shut off the FEL), to make the Rear 3PH work...

Looking for a steering wheel for my B6000. Dont know if it interchanges with other models. Kubota part number 66601-41400 Someone put an old dune buggy wheel on it and it since the tractor sat in the rain for years, the wheel is "weeping" nasty water from inside the rubber grip.

Today I bought a B6000 and am familiarizing myself with it. I got a really great deal and it came with a B-36 tiller and K-348-7 mower, neither of which are compatible with the machine, unfortunately. So, now I need to find the right ones or buy a PTO reverser. Where's a good place online...

I have either a 506 or a 515 loader on my kubota b6000. The bucket is croaked on it. it seems like the left hand side lift cylinder sits down lower than the right. so I took a tape measure to it and the left side is an inch lower than the right. I rebuilt both the rams not even 4 hours ago. It...

I have either a 506 or a 515 loader on my kubota b6000. The bucket is croaked on it. it seems like the left hand side lift cylinder sits down lower than the right. so I took a tape measure to it and the left side is an inch lower than the right. I rebuilt both the rams not even 4 hours ago. It...

I saw a photo of a B6000 with the rear wheels put on 'inside out' so to speak. After looking at my axle, it does appear that you could take the wheels off, and put them on inside out to gain maybe an inch or two of width. Is this worth it? (the schrader valves would be in the inside though)

G'day I've got a Kubota B6000 mini tractor and I'm looking for the Bonnet Hook part no. 66601-55210. Does anyone have one for sale??? Thanks Steve

Hello all: I am the proud new father of a "new" b6000. three questions/problems. the hydraulics for the FEL run off the top of the pump housing for the rear lift. trying to determine; is the rear lift shot, disconnected, or can it not 'compete' while the FEL is hooked up? the assembly has...

I am going to sell my Kubota B6000 for a bigger tractor and I am wondering what it is worth. it is a kubota B6000 2 cylinder diesel. Has a 206 loader on it with a 48" bucket and 48" tooth bar. It comes with a back blade that is 48" wide. And a leinbach 7400 poat hole digger. the post hole digger...

I am going to sell my Kubota B6000 for a bigger tractor and I am wondering what it is worth. it is a kubota B6000 2 cylinder diesel. Has a 206 loader on it with a 48" bucket and 48" tooth bar. It comes with a back blade that is 48" wide. And a leinbach 7400 poat hole digger. the post hole digger...

Does anyone know where the fill thing is for the 3pt hitch. I went to use the 3pt hitch while doing the post hole digger and it started not to bring it back up out of the hole. any ideas?

Hello folks, New poster here. I'm in the middle of old Kubota ROPS ****. I decided to take advantage of Kubotas ROPS promotion and a NY program that rebates much of the cost. I ordered the thing from my local dealer and got a bar (model 1060G) that is made to fit the B6100 series and others...

I'm looking to buy my first tractor. I'm going to look at a B6000 with a Woods PTO finishing mower. I've got around 8 acres of pasture which is pretty steep that I need to keep mowed. Otherwise I will just be doing a little gardening and dragging stuff around the farm. Will this tractor...

kubota b6000 tiller, where can I find new seals and tiller blades. Or even a part number of the tiller I can't find anything on mine.

I recently bought a new attachment for my tractor. And that was a post hole digger. When I turn my PTO on the PTO spins the wrong way and the auger wont dig. Can anyone tell me how I can make it so it is reversed??? Can I reverse something to make it work?? Please help as soon as you can.

What is the model of the tiller that comes with the B6000? Where can i find new tines?h

I am interested in purchasing a kubota b6000. 4wd I have 40 acres and 11 stream crossings. lots of hills. This summer I need a vehicle to get up on there with a chainsaw and some tools to eradicate invasives, grape, honey suckle, barberry...clean up tops of trees.....also to just get around. I...

How hard is it to replace the swivel seals on the front end of a 4wd Kubota B6000? both of mine are leaking when she sits for any length of time. Unknown hours on the machine, but its a 1975 model year, so they are well due for replacement. I am fairly good at wrenchin but never tackled this...

I didnt care for the plain jane black ribbed nose emblem on my B6000. So I found a pic of the later models that had the chrome "bulls head" logo on the nose. I printed it out and used it as a template to make one from white reflective 3M decal material that I have. I drew in a few details to...

Just before I got my b6000, I found a website in the UK that had lots of parts for this model, I forget to bookmark it and now I cant find it. I maybe needing a new or good used muffler as the outlet pipe is loose and leaking between it and the muffler body, it wont rotate, but rattles around...

I am on the hunt for a pair of the deep lug rice patty ags for my Kubota B6000 4wd. I will have it home shortly, just bought it and I dont care for the shallow lug ags on the front. Anybody got a source for a pair of the deep lug ones? Thanks Mike

I am looking at purchasing a B6000 4x4 with the hyd lift/hyd angle snow blade mounted on it. I know about the backwards rear PTO, which is fine as I dont need rear pto ablities and have plenty of time to locate one of the woods 3pt mount mowers for it. I mainly need a small 4x4 with cat 1 3pt...

I got the sevice manual for B6000.Doesn't even mention a governor. The problem is that the engine speed will take off. The diesel injector shop says the injector pump is OK. There is a nut that sets on the front of the governor housing with a cover over it and a set nut to keep it from moving...

My kubota b6000 seemed to gel up last saturday. It ran for about 2 minutes then it shut right off. I put it in a warm garage overnight and tried to start it. Nothing just turned over. So I pulled the fuel filter off to see if it was plugged. It isnt. So I bled the system. Nothing. I can force...

My kubota b6000 seemed to gel up last saturday. It ran for about 2 minutes then it shut right off. I put it in a warm garage overnight and tried to start it. Nothing just turned over. So I pulled the fuel filter off to see if it was plugged. It isnt. So I bled the system. Nothing. I can force...

any b6000 owners left ? maybe ex-owners...... poor country-boy just used life savings (2100.00) to buy a 77 b6000 4wd/pto reverser to move snow on 500ft driveway in maine. thought it was in great shape, but apparently, guy i bought it from charged the **** out of the battery the two times i...

neither my lights nor my horn work. Can anyone give me a starting point on diagnosing? I've got the wiring diagram. One thing I'd like to figure out is how to test the dynamo (generator), it's got three wires off of it and the manual does a crappy job of telling me what each should be doing...

I know I'm asking for the impossible, but I would like to find a pto reverser for a kubota b6000, I have the original rototiller, which works fine with the pto, but I would like the option of using standard equipment thanks don

1977 4wd Diesel Backhoe Front Bucket Rototiller Box Scraper Cement Mixer Manuals Trailer not included 6000.00 Cash My questions: How many hours on the tractor? Any mechanical issues? All implements work? When is it available for viewing and/or is it parked where I can take a look at it? His...

As an update to my question: Our old b600 is the first tractor that we've ever owned. We got it in only moderate shape(it ran-just), rehabed it, strengthened the FEL, built a rollbar/cage and learned through a multitude of broken parts and shattered nerves how far was much, much to far to push...

My poor, old tractor is a hurtin' puppy! Twice in the last couple weeks I have started up to have water and what appears to be engine oil blow out the blowby tube!!! There's no water in the engine oil, and draining the water does not show any traces of oil in the coolant jacket. What in the heck...

I have a friend looking at a 2wd B6000E with FEL,Woods48"RFM,and a front mount snowblower.Also has wheel weights and chains.It is a 2cyl. diesel he doesn't know how many hours are on it.The seller wants $5500.00.The pictures I've seen looks to be a clean unit for the age.All info. or advice will...

Hello everyone. I'm a newbie here. I bought a B6000 in order to tackle my large/ish garden. I am aware that the P.T.O. turns anti-clock but that should not be an issue for me. I have purchased a small backhoe and therein lies my first problem. In order to get hydraulic supply to the backhoe I...

Can any tell me if I can still buy a snowplow and belly mower for my tractor, even if it is an aftermarket....thank you

I purchased a B6000 last year and have worked out most of the problems except for the clutch. It needs replaced and I was wondering if anyone could offer any tips on this model of tractor. I have an owners and shop manual but they are not really detailed as to replacing the clutch. This little...

I just purchased a B6000 with FEL, and want to get a ROPS put on it. I need to find the serial number to use on the Certificate I downloaded from Kubota's site. The decal on the frame that shows Engine Model, Tractor Model, shift pattern, etc. is badly worn, and I cannot see the serial number...

Does anyone know which way the nut that holds the crank shaft pully turns on a B6000? I am having trouble getting it loose. It is reverse thread? Any answers would be appreciated. Thank You, Rick

I have a late 70's Kubota B6000 (2wd)and I am having 2 problems with it. 1) After the tractor is running for say 5 min. the oil light comes on and stays on. I have changed the oil and cleaned the screen but it still does this. 2) The clutch will work fine for the first 5 min. and then it...

Just in case someone is looking for something web page At least a lot of parts, dont know about prices of the items wheater its a good deal or not though.

1 question for now but im sure therell be more can anyone tell me or tell me where to find the distance between the wheels inside and outside front and back, its so i can work out where to put the planks that the wheels run along on a trailer thanks for all the answers

HI all, I am looking for a B6000 snow blower and the associated hardware to hook up to the tractor, Brackets, PTO, hydraulic lift, etc. Any thoughts on who may have one? thanks, Joel

nearby there is a b6000E (whats the e far anyway) for sale for £1000 - included is a topper and possibly a trailer. it doesnt smoke and all works fine - its done little work and starts right up - i know about the PTO going the wrong way i want to but it but a mistake could cost me bigtime...

Hi all, I am looking for a backhoe for my B6000, there is a Kubota 619B made for this tractor. Please respond to this post if you have one of these backhoes and are interested in selling. I realize there are three point, aftermarkets available (I have a towable backhoe already), but I am...

Can anyone tell me where i can buy a pto adapter for a b6000.

Can anyone tell me where I can get a pto adapter for a B6000.

The 3 point lift arms on my b6000 lift right up but gradually sink all the way down, even without a load on them. Any advice would be appreciated.

I have a Kubota 12hp B6000 circa 1984 which I bought as a grey import 2 yrs ago. The dealer at the time told me the tractors were split and shipped to UK in crates where they reassembled and checked them over. Tractor runs great for something so small. However, with purchase of 30hp Iseki last...

I have a 78 B6000 which has a counter-clockwise rotating PTO. I have been told on this board that there used to be a reverser kit (a gearbox that bolts on the PTO) available. Hub City no longer makes the kit - does anyone know where I can get one? Thanks for your help!

I have a 78 B6000E with a counter rotating PTO. I would like a 48" brush hog, which leaves me with two options: 1) Anyone know where I could buy one 2) Could I reverse the blade on a regular KingKutter hog and simply run it backwards? Thanks for your opinions!

I recently bought a B6000 (about a 1978 model) that runs great and has a 48" Kobuta MMM. Only problem is that the pulley on the front of the engine drives the long belt for the mower the wrong direction (blades turn backwards). I have thought of two possible solutions. 1. Get a slightly...

I have a Kubota b6000 4x4 with a belly mower for sale @ 3500 or best,dont know if it is grey or not

This is the first winter for me and my B6000E, and so far it has started reasonably well in the mid 20s with LONG glow plug times. My machine has a compression release knob, and I am looking for advise on how best to use it. Should I pull it out while cranking, and push it in just before she...

If you\'ve got a B6000 and want an OEM loader... This might be your source. This was forwarded to me this morning: --- May I please ask you and Mohammed to post for maximum exposure this very important message to all Kubota B-6000 owners. I am a Kubota B-6000 owner that is in close contact...

I am looking at a clean B6000 that I found on the classifieds here. Very nice, stored indoors. Can anyone tell me about this model. I dont know the age, hp, track record, etc. I did read somewhere that another poster has a grey market B7000 - is the B6000 a US model? Can parts be found?

Ive never owned a tractor and need some advice.I live in B.C. Canada and need a tractor for landscaping my yard and some snowplowing(mostly a toy).Anyway theres an older b6000 4wd at a local tractor store.Its in good-excellent cond.hrs unknown.Its got a blade only.My question is can i get a...

Hello everyone! I have a B6000 (grey market here in Greece) and haven't been able to find out how frequently to have the engine oil changed. As it has no engine oil filter I don't want to run it as long as the other equipment between changes. Would also anyone know how to obtain an operators...

I'm in need of a rear mount finish mower for a B6000

Howdy! I'm needing a small tractor mainly for bush-hogging and box-blading my 6.5 acres. Found a mid-70's B6000E for $2000 with a 5-yr. old 38" bushhog. Seems like a good deal. It looks a little rough, with a fair amount of oil leaks, though nothing streaming. It is in decent running...

My B6000 came with the 'standard?' Kubota rotovator. i.e it's bolted to the pto, pivots at the pto-end sprocket and is lifted by 2 arms. From reading postings, it looks like I could take off the rotovator and convert the lifter unit to a Cat1 3ph. Are there ready made kits for this, or is it a...

The loader hydraulic pump on my B6000 is on its last legs. It's noisy even when outside temps are warm. This time of year it howls like a banshee and barely even moves the loader. I doubt that the original pump is still available from Kubota, but since it's a simple belt driven unit, I should...

I've got an old B6000 with loader which has had a rough life. Over the 10 years I've owned it, I've gone through it and it's now in reasonable mechanical shape, and I have repainted it and detailed it out so that it looks fairly sharp. I've just started dickering with my local dealer to buy...

Are there any UK B6000 owners on this forum? Does anyone know where I can get a used rear PTO topper or a front loader for my B6000. I've been quoted 1000 pounds for a new Kubota topper unit - eek!!!! Would also be interested in bits to convert the rotovator lift arms to a proper (Cat 0/1??) 3...

Any of you up north in Michigan interested? eBay has a B6000 with a tiller and disk going at $2500.00 the url is: http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=402299166

I am in need of a B6000E cylinder head . Any one nknow where I can get a used one?

I need a cylinder head for a b6000e.