john deere 750

I put a new bucket on my dad's JD 750 with 67 loader last weekend. I struggled to find a replacement that came with the same 4 pin mounts like the original, so I had to do it the hard way. I bought a new 60" utility tractor bucket designed as a replacement for compact tractors. I thought what...

I'm new to this with an old JD750. Trying to fix extremely slow actuators while the PS is working just fine. Pulled the diverter valve and it's clean and moves smoothly. Have the JD manual and it's excellent explaining the circuits, but it's new to me so want to ask if it sounds like I'm on...

Morning, I'm looking for the front electric PTO clutch for my John Deere 750. (Part numbers are LVA801788, CH18191 OR CH15320.) I brought a snowblower for my 750 this summer, not knowing that my 750 didn't have the front electric PTO clutch. Any help i can get finding one or know of a an after...

Noticed a nice little leak coming from the picture. Located under the driver seat. Tried to tighten that bolt - no luck it won’t move at all.

Original Bridgestone R3 6-14 tires, one of them at least finally bit the dust. Holes in the sidewall, tube blew - thought someone was shooting at me. LOL. They are really proud of those Bridgestones, when you can find them. Diameter is right at 25". Wondering if throwing on some 25x8.5x14s...

My dad has a 1980's vintage JD 750 4wd compact tractor, and he's had it for many years. One of the front wheel hubs had a bearing seize up, and when it locked up tight when he was skidding a log it smoked a couple of gears in the transmission on the FWD side of things. Apparently, the two gears...

Hey folks, I'm helping my grandpa troubleshoot a squeeling issue on his Johne Deere 750 tractor. He had the hydraulic pump replaced recently, and has since developed a squeeling sound at idle. The squeeling goes away as soon as the hydraulics are engaged, and returns as soon as hydraulic...

I have a Deere 750 that sat for several years unused. The arms are not lifted when pulling back on the lift handle. I just downloaded the Deere manual but am not sure what different valves might cause this problem. What different items should I check?

So my very worn (4400+ hours) 750 was making a heck of a racket when I started her up this morning. Up until now, they hydraulics were smooth but slow and I know I need to rebuild the curl cylinders but that's a project for another time. The motor seemed to be purring quite nicely but I think...

On my John Deere 750 Tractor the oil pump housing broke and the engine failed. We currently have the engine apart and it is sitting at a machine shop. All four main bearings spun. The rod journals on the crankshaft look fine. The Rear bearing was the worst effected but we now have a good...

First post here. I recently noticed a lot of fluid leaking from the front axle housing. I tracked it down to the big round seal at the steering pivot (#20) on the RH side. Arrows are pointing at same location for reference. According to service manual, it looks really easy to access...

Is it advisable to machine the gears on this flywheel making them narrower? What I mean is to remove the material that is worn. Perhaps this will cause more problems? The other photo is of my starter gear. Should this be replaced or somehow reconditioned? What is common practice in these...

I would be very grateful for any insight into how to find out why my engine blew. When we went to rebuild the engine we noticed the oil pump had broken! Now we are faced with a major rebuild. We use this tractor for a food ministry to the poor and sick (cancer patients whos doctors have...

I was gifted a John Deere 750 tractor by a good friend of mine. The 3pt hitch will not go up or down so we drained all fluids replaced with new fluids cleaned all filters still would not work. Next step we took pump off and took apart found that woodruff key was sheared so we replaced with new...

I was gifted a John Deere 750 tractor by a good friend of mine. The 3pt hitch will not go up or down so we drained all fluids replaced with new fluids cleaned all filters still would not work. Next step we took pump off and took apart found that woodruff key was sheared so we replaced with new...

Good afternoon! TBN has been a godsend for me. Had a few electrical issues on my old 2WD JD670 that were quickly resolved by some of the fine folks (joecdeere) on this forum. I just picked up 4WD 750 that will need quite a bit of TLC. Runs great but i need a ROPS and would like to add a 67...

Background: FIL gave me his late 80s JD750 tractor w/ 70 series loader. FIL is a GREAT guy -but when it comes to vehicle / equipment maintenance not so much. This tractor was not worked all that hard in the last 30 years. 1400 hours total on it now. He bought it used probably 30 years ago...

Hello Folks My 1985 JD750 has started getting hot in these summer days. I did a coolant flush about a year ago, cleaned the exterior of the radiator, new belt and thermostat after an overheating incident. Last time I was using it just to ride around on, the temp climbed to 100*C and stayed...

Greetings all -- I have a tractor that I'd like to sell and want your impression on a price that I should ask. It's a late 1980's John Deere model 750 with a model 67 loader and model 7 backhoe. It's a 3 cylinder Yanmar with 19 horsepower or so with 1530 hours on it. It always starts no...

Folks - Not sure if it was in this forum or something like Green Tractor Talk, but I recall somebody linking to a company that offered a full set of turf rims and tires for the JD750. I believe the rims were white-ish in color, and expensive. Does that ring a bell for anyone? If so, please...

Hello Folks, I have a broken wire in the starting circuit on my tractor. I was able to get the white plastic ends off of the wire in question. What I don't know is the technical name for the brass connector. There seems to be many styles similar to this one. The wire seems to be only 18...

I am buying a Deere 750. When using the attachments, there is a loss of power. They will move, but not very well. My friend thinks there is water in the hydraulic lines and everything needs flushed and cleaned. This machine does have a front end loader, backhoe and power steering. My...

I have a Mid 80's John Deere 750 4x4 non power steering. Everything worked fine before I parked for the winter. I kept the clutch pushed down over the winter because it got stuck to the flywheel the year before. Now it starts and runs great and everything works as it should except the rear pro...

My John Deere 750 Tractor keeps blowing the 10 amp indicator fuse when the ignition switch is turned on. My 60 inch mower deck blades stop turning when this fuse blows. I have disconnected the electric PTO clutch harness and the fuse still blows, also disconnected the seat safety switch, fuse...

Can someone help me find a PTO Clutch assembly for my 1983 John Deere 750 Tractor. The John Deere part number is LVA801788 and John Deere says this part is obsolete and is no longer available. If this part cannot be found, does anyone know where can I get mine rebuilt? Thanks

Howdy Folks, I've got a MFWD JD 750 with with turf tires and I need more traction. From other posts I've read, I understand I would need to secure a set of Ag rims in order to run Ag tires, but I am curious if anyone knows a more aggressive turf tire I could run? My 750 is my only "big"...

The JD750 I just purchased would have had ROP's at delivery in 1986, the original owner was mowing under trees and removed it. Over the course of time they lost track of it, Deere does not offer new and I have had no luck finding used. Are there any flat land 750 owners out there that removed...

Hi Y'all, I have a 1984 John Deere 750 with bar tires and looking to switch to turf tires for the summer. I recently purchased a rear set on ebay and, while the bolt pattern and center bore are spot on, the backspacing is incorrect and the tires rub on the bolts holding the rockshaft lever...

I put new hydraulic fluid and a new filter into my JD 750 tractor yesterday, and ran it around for a bit for some light chores. There's a whining noise that starts when I use the controls for the JD 67 loader, and some noise coming from the area of the hydraulic pump and housing when running...

I buggered the first couple of threads on the steering column of my JD750 tractor while removing the steering wheel. I'm pretty sure, based on the thread-pitch gauges at the hardware store, that the nut that holds the steering wheel in place is 7/16 x 20. Before I spend $30 on a rethreading...

Does anyone know how the Tach circuit on a JD750 works? What causes it to indicate engine speed? I have both the parts and service manuals and can't seem to find a Tach Sending Unit.

Hi Guys, While I was out brush hogging with my John Deere 750 compact tractor, I noticed that the 3 point hitch had lowered completely down. When I tried to raise it the upper arms move about a half an inch but they don't seem to have enough power to lift the implement. Does anyone have any idea...

I have a John Deere 750 4x4 tractor with a factory front loader. On the remote lever hydraulic assembly for operating the front loader, the valve for curling the bucket works fine (both up and down). Moving the right lever forward and back, I can move its corresponding valve in the valve...

Hello folks, I've searched the net and haven't found anyone discussing these two in the same conversation. The reason for these two is there is one of each for sale within reasonable distance of me for what I feel are reasonable prices (as reasonable as compact tractor prices are anyway...

My John Deere 750 is puking oil out the blow by tube any ideas?

I have older model with manual lever to engage 4x4. Most recently I replaced the clutch and related, put it all back together and most recently went to use the 4x4 and it doesn't work? I pulled driveline tube back and looked at the coupler to the front axle and its hooked up fine. not sure...

I recently acquired the power angle blade made for my John Deere 750. I need to add the selective control valve and was hoping to get some advice. I found the original 2 handle control valve new for $1180.00, plus shipping of course. I would really prefer a single joystick type control. The...

Hey there! New to the tractor world here.....I purchased a 1986 JD 750 with a loader and a 7 backhoe this weekend with 900 original hours for 7k I have to do a clutch job on it as the throw out is not hitting the pressure plate all the time (so it seems)....it seems to work sometimes if you...

The loader and backhoe on my JD750 have always run smooth and quiet. Recently they started running ruff and noisy. I am thinking air is getting into the system or the pump is starving. Oil level is good. Has anyone had this problem and if so what did you do to fix it? Johnd755

I am looking to replace 34 year old mower deck for my John Deere 750, new or used, complete deck or shell only

Hi everyone, I made the mistake of removing the dipper cylinder to get repacked without coping down how it goes back together. Now the controls work backwards. I tried switching the hoses arounds and it won't work at all. Is the cylinder in backwards? The main body of the cylinder in away from...

Today found that my valve stem was leaking fluid and air. How easy are they to obtain and repair? What would be the proper procedure?

Was doing some landscaping and my right wheel locked, used the bucket to lift the front end up and sure enough the right tire will not spin whether in 4wd or 2wd. So, I shut down and called it quits for the day, next morning I get to removing the wheel and gear casing and find the top most...

Could anyone recommend an LED upgrade? I was thinking of adding four LED lamps on my ROPS, two pointing forward and two for the rear. The headlights are woefully inadequate but have been unable to find a suitable replacement.

I noticed just recently that the MFWD does not function on my tractor now. I looked around the control arm and drop housing and saw nothing of interest, I unscrewed the drive shaft retainer cover and yanked back on that and the connection seems to be ok, when I rock the shaft with hand I can...

I bought a used machine and noticed recently that it has a cracked frame right before the front axle. I reckon that I tear down machine come winter, mig weld and fish plat weld over the crack. Does that sound good enough?

King Pin Support broke while mowing this weekend and having a hard time finding the part . Part #194362-13810. Any help would be greatly appreciated.

Looking for John Deere 750 Electrical Schematics. Having problems with the safety switches.

I recently bought a place on 10 acres and an old JD 750 tractor with a loader came with it. The tractor ran fine at first but recently started to emit oil and/or diesel from the breather tube. The tractor smokes a lot upon starting it but then seems to have normal exhaust after running for a...

I have a 750 with a frontend loader want to find out How much wieght can this tractor lift with the three point anyone know

Hello, I'm interested in buying a 750, 770, 790, or 3005 John Deere. I was curious what people think about them and their track record. The tractors are all fairly similar. I want 4wd with Ag or Industrial tires. Will be used in large garden, woods and just general chores like moving...

I have a John Deere 750 compact tractor with 4 wheel drive. The front wheels quit pulling. The lever that engages the 4 wheel drive feels like the linkage might be broken. Anyone ever run into this before? I'm just curious what I might run into when I tear into it. Is it an easy fix? I'm not...

i have a john deere 750 sub compact tractor. if i rev the engine up beyond a certain point a light which appears to be water temp flashes more and more with increases with the throttle,the light sometimes doesn't do this .i am baffled? any ideas as to weather i need a new thermostat or what...

I am looking at getting a no till drill to reseed our pastures with. I have a john deere 5083e with cab loader, and the tires are filled with ballast. The tractor weighs about 10k pounds or more. We have some serious hills but I would go down them, up where i thought was safe, and sideways where...

Hello, I have JD 750 tractor the battery is fully charged but when i turn on the key nothing. Its seems like safety switch of some sort any help would be appreciated. Bobby

Hi This is my first time posting to the forum. Last year I purchased a used Woods Du All 155 loader from a John Deere dealership for my John Deere 750. It was on a John Deere 750 so I took some photo's of how the lines where hooked up to that tractor. I have the operators manual for the...

Looking to convert my 4WD JD 750 from a mower to a farmer, so I am searching for R1 tires on 7x24 rear wheels and 6x14 front wheels, both 6 bolt. Should look something like this:

My tractor hydraulics seem to have lost a lot of power. A hissing noise when at full steer or when the 3pt hitch or loader is heavily loaded suggests the hysdraulic bypass valve is set too low. How is this valve serviced without owning a pressure gauge?

I have a John Deere 750 compact tractor that has turf tires on it. I live on hilly terrain so I need a wide track to keep it stable. Are there any industrial or ag tires made that will fit my wide turf tire rims? I know they offer a narrow ag tire on that tractor but it's too narrow to be safe...

Sorry. Double post. Please delete

I'm looking at a John Deere 750 with the following specs: 1985 540 Hours 4wd ag tires no PS no implements Has had regular maintenance all it's life. The low hours are due to it simply not being used. Sat in the shed and was used a few times a year. $4200 seems like a good price. Thoughts?

I have a JD 750 tractor and the tach has gone crazy (the tach needle is constantly moving, even at an idle). I have read previous posts about the cable being a possible cause. I am also working to troubleshoot an alternator / voltage regulator problem. My question is: Can a malfunctioning...

Looking for a front loader for my 1985 John Deere 750 tractor. Please contact me if you have one or know where I can find one. Jake jakesapio@gmail.com 716-674-0771

are there any hydraulic pumps that will interchange with the pump on my jd750?

I have a John Deere 750 gear drive tractor. This last summer I notice that when you shut the throttle all the way off the engine keeps running. You have to put the tractor in gear and hold the break to kill the engine to shut it off. It there an adjustment that can be made to the diesel pump...

need the torque spec for head bolts rod and main john deere 750 with a yanmar 3t80uj

I have an opportunity to buy a 750 4wd with low hours for $2500. Hydraulics on the lift running really slow. new turf tires. I'm thinking it's a great deal for the price. What do you guys think?

can anyone tell me if I can use a kubota 56" tiller for my JD 750 mfwd turf tired 18hp pto tractor. Will be tilling loamy soil/w sand. I have one near me for sale--it is older. Or is this a little too big, should I stick to looking for 48". thanks

Any one have a schematic they can copy paste on here of a JOHN DEERE 750 BELLY MOUNT MOWER DECK . We bought a tractor and not sure if the mower deck is attached correctly on the front end. of course no manual is with the parts ...

Just purchased JD 750. No Manual came with Tractor. Would like to know how to check all fluids, oil, Hyd Fluid, etc - locations.... How often to change? Thanks!

I recently purchased a 1982 JD 750 that has been sitting for several years outside. Tractor will not start due to fuel not getting past the injector pump. I have removed the pump and will take to a repair shop to test or rebuild. My question is if the pump is rebuilt will the timing have to be...

Looking for feedback on a John Deere 750 tractor and want feedback - good or bad.

I have a 1988 JD750 4x4. I am looking for a rebuild kit for the hydraulic pump and control valve for the 67 loader. It seems to have gotten weaker over the years. I have inheritied this from my father when he passed away. He bought the tractor brand new in 1988. Thanks for the help. Robert

Hello everyone basically the title says it all:drink:

1983 JD750 840hrs - new to me - lights dont work. - Disconnect all fore and aft lights at connectors under hood and under seat - Found most fuses twice proper rating, replaced with correct, none were or are blown Observed at fuse box with voltmeter: - If fuses removed, see good 12v on inside...

Hi folks, I'm new here and hope to get some advice. I am selling my Ford 917 L "Special" flail mower (model 22-6001) and have been asked whether it is too big for a John Deere 750 tractor. The JD is a 20 hp mid-sized tractor, but I know nothing about it. Until recently, I used a Deutz D5506...

Can anyone tell me what would cause the hydraulic fluid to fill the engine oil crankcase and come out the vent tube or overflow tube on the engine??? Just put a kit in the hyd pump and work good for about 10 minutes then started dumping engine oil and hydraulic fluid on the ground from the tube...

I am looking for a used injector pump part # CH15618. I have been looking in vain for used 750 parts. Does any one have a lead on where to go? THANKS RICH rich386@windstream.net

I'm looking for a set of turf tires and wheels for a John Deere 750 tractor. Jake Sapio jakesapio@gmail.com

i just purchased a used front end loader that wasnt used very much for my John Deere 750 the problem that im having is i dont know where my hydraulic lines need to go because it does not have quick connect but i was told that i can tap into some plugs that are under the seat but i dont know...

lift arms wont go up making loud scream

Interested in this machine, description as detailed below - he is asking $9,900 (not sure if that is high or not for my area) I live in NH and want to do general loader and backhoe work, nothing big or heavy... I know who the guy is, he just buys and sells machines - he's not a dealer but used...

i just purchased a used front end loader that wasnt used very much for my john deere 750 the problem that im having is i dont know where my hydraulic lines need to go because it does not have quick connect but i was told that i can tap into some plugs that are under the seat but i dont know...

Greetings- New Memeber here- I am going to purchase a Koyker 120 loader for my tractor- its a basic tractor-no ps-used all these years to just mow 5 acreas with 3pt grooming mower. where do the hydraulics lines off the loader connect to- I have no ports unless they connect to the ports under...

A friend of mine at work inherited a 1984 John Deere 750 from his father. His father bought it new and it has 900 hours on it and is in very good condition. It is 2wd with a gear transmission and a RFM. It has ag tires on it that are also in good condition. It does not have a FEL. My friend said...

Hey does any one know has much it cost to get the hydrolic seal right under the seat replaced. Has anyone ever replaced one themselfs if so how hard is it to do

Is a John Deere 750 2+4 no power steering with 3 pt hook up with 770 hrs looks to be in mint cont. For 3,500. I have a drive way that is 300 feet long that always needs work and 3 acers of grass and I would like to plant about a acer garden. Is this a good price and will this tractor be good...

JD 750 tractor w/67 fel, 2WD, 2000 plus hours...how would you test it out to see if it is worth the asking price.. does have a few leaks on loader and says it has NO power steering, any help would be appreciated

I have a 5 ft bush hog which is probably a little too big for the tractor, but it has handled it ok previously. I attempted to use the tractor for 5-6 hours Sat The tractor wouldnt cut the field low so I was trying to pretty much top the grass to break down the seed heads. All worked with no...

I recently purchase a 1985 JD 750 which had no brakes.. the pedal would offer no resistance and would go all the way down. I just replace the brake shoes and have reached the maximum adjustment on the brakes and they still don't come close to stopping the tractor when moving. The brakes are...

I just bought a 1985 John Deere 750 (4 wheel drive with loader). This model came with power steering because of the loader and I just noticed that it doesn't make left turns as sharp as right turns. The difference is very significant and must be fixed. It was dark last night when I got it...

Hello all, i have a simple but not an easy question: is there somewhere out someone who compared the John Deere 750/850 with the Yanmars the same size? I ask, because I want to register my Yanmar in Germany, and that is not that easy. I think the JD 750/850 has been also sold in germany. They...

Has anyone had a problem with the 750 tractor running then starts to act like it is out of diesel fuel, I have changed filter and if I loosen the bolt on the enjectors like 1 and 3 it starts to act a little better? Help

Last week my JD 750 started great, but when I tried to do some bush hogging, the engine quit without warning. It restared fairly easily, but whenever I tried to put a small load on the engine it would quit again (I also noticed a lot of blow-by coming from the hose attached to the valve cover)...

I have a buddy looking for a FEL for his older (1985) JD750. Has anyone out there got a recommendation? He lives in SE Michigan. Local dealers of used equipment? Thanks, Rich

I am looking for a set of ag tires and rims for the front and rear of my John Deere 750 compact 4x4 tractor. If you have a set please feel free to contact me at my email address shannon@airpurinc.com or 919-562-4110. Thank you for your time.

OK guys my dads friend has a john deere 750 with the 3 cyl Yanmar diesel with 800 hrs and like 25 years old. About a year in a half ago it puked out collant we tested the radiator for exhaust gases. Came back positive. SO we had pulled the head off and when we had pulled it off the last cylinder...

I have an 87 JD 750 tractor that I want to add a set of remotes to. The deere dealers around me say I need a power beyond kit. They dont have any, cannot order any and cannot give me any literature or help as to how it hooks up. I have an FEL with 1/4 lines but I am trying to power a 3pt log...

Hi guys. I just purchased a JD 750 with 4wd. Unfortunately I sent my dad to pick it up and he did not try it out or get a demo. :( It starts and runs great and overall appears to be in excellent shape. However, I have a few questions and maybe one problem. It has a switch on the dash for the 4wd...

Are these a decent buy if you can find one in good shape? (eg, in terms of long term reliability, etc... ? ) How are the FEL's that are typically seen on them? (JD 70A) etc. Are the hydraulics useable, or are they slower than what one would find on a 2520, etc. -Mike

I am new to the tractor world and need one to help me clear and landscape about 1 1/2 acres that is full of brush, sapplings and alders. I am looking at two JD 750's. (I own a JD 216 lawn tractor and that thing is a tank! So I am comfortable with JD.) Both are selling for just above $6000 and...

Hi All, I know this question has been addressed in some form or another on other models so here goes. I have a mfwd 750 with turfs that are shot. I would like to either have a very aggressive turf like the galaxy mighty mow (not avail in my size), or R4 tires (my preference). From what I...

Lots of feedback on snow removal and what seems best. I also prefer a front mounted blade versus a blower because of the gravel and rocks on my laneway. Curiously the front blade on my JD 750 does not have any downpressure because of the length of the hydraulic cylinder. It "just" stays off the...

Dads looking at buying a 1985 john deere 750 4 wheel drive with turf tires, and it has another set of ag tires and wheels,and a 60 inch mid mount mower all for $5900, does this seem good?...It has a few minor things that need fixed such as lights and one rim needs a lil attention where the valve...

My first post!!! i hope you dont mark off points for spelling. I just bought a John Deere 750 for $500.00 i knew the clutch was bad when i bought it. the day i picked it up i found out the motor was stuck. so today i was able to get the motor freed up so i got lucky. during the week ill...

Hi all am new here and have a question. I have a JD750, 3 cyl diesel, about 27 hp IIRC, and am dissapointed in the power of the hydraulic power of this machine. It seems the pressure limit switch or valve kicks out no matter what I am doing, Previous to this tractor I had a Yanmar 2 cyl diesel...

Looks like I may be heaed this way does anyone have a REAL idea about what a dealer will charge parts and labor to replace a hydro pump with their parts On a 1983 JD 750 , 22HP, 3 cyl yanmar engine. Please only reply with real experiences as I don't want wild guesses, as I'm sure the real number...

Hello, First time poster, long time reader/searcher of TractorByNet... Amazing info here. I am looking to buy my first tractor. I’m located in Northern CA. and the tractor will be used for chores around the house and property. The tractor I am going to look at tomorrow is a John Deere 750...

I have a friend that has an older JD 750 dozer. When he tilts the blade to the left the forward movement of the dozer stops. This is a hydrostatic transmission. As soon as he tilts the blade to the right, it will start moving again. He can raise and lower the blade and it does not affect...

I want to put T&T on my JD 750. I have been reading the posts here, so I don't have to start at the beginning. My question is this: the cylinders (Green Mfg., Prince, and Bailey) all have the right cylinder - 3" X 10"stroke. However, they advertise that the swivel ends have a 1 inch hole...

I just bought a JD 750 with 4000 hours, it was used to cut grass with a belly mower. Is there anything I need to be aware of as far as problems? I plan on using it to run a bush hog and thats about it. It looks pretty good and mechanicals seem good. Benahs

Hello all, I have been reading these posts here for several months, and I can't tell you the wealth of information I have picked up. However,I am hoping someone can give me an idea what an 85-86 JD 750 mfwd,manual shift, 1451 hrs is worth. The following attachments come with the tractor: 60"...