john deere 4410

I have a John Deere 4410 compact utility with E hydro.When the load match is off the tractor acts normal. When I switch on the load match switch the tractor moving speed slows and is sluggish……Someone told me it could be a sensor that is on transmission and one on bellhousing of engine?? Any...

Hi My gear and shaft on a JD4410 broke, and i will have to replace them. Have anyone done that job? Is it possible to do without splitting the back end?

I HAVE A JD 4410 COMPACT TRACTOR, I AM LOOKING FOR A 430 FRONT-END LOADER ATTACHMENT FOR THIS TRACTOR BUT THEY ARE HARD TO FIND USED AND IF ANYBODY HAS OR KNOWS SOMEONE WHO HAS ONE AND IS INTERESTED IN SELLING IT SEND ME THERE CONTACT INFORMATION, AND IF I CANNOT GET THIS MODEL ARE THERE ANY...

Title explains d.s. mistake. 4410 will not start. Fuse box no relay indicator lights are on. All fuses appear good, lights work, dash lights, etc. work. Heat plug light indicator comes on. Turn ignition switch hear one click from starter/solenoid and all power is killed. Disconnect battery...

But my collection doesn't stop there. Oh no, it wouldn't be complete without mentioning the infamous Streamate. This site has been around for quite some time, and it has proved to stand the test of time. With thousands of models to choose from, and a user-friendly interface, it is no wonder that...

Looking for a quick install for a mirror for my John Deere 4410 compact tractor. I remember a post from years ago from a person selling mirrors with attaching hardware

my hydrostatic pedal springs are shot which makes the tractor not always go forward or backwards. how does one replace these springs. luv1390 is the part number and they are behind the plastic cover. i have the new springs and took the cover off and took the pin out in between the two...

Hi everyone, I just picked this neat little tractor up. It’s a 4410 gear trans with electric shuttle. Also has the factory mid scv diverter to run top and tilt with the loader joystick, and a dedicated third function lever. Here’s a couple pics. I have it somewhat disassembled as I washed...

After running for about an hour the tractor loses power and dies. This has repeated itself 3 times. If I wait for a few minutes and restart it, everything works fine. The dealer thinks something might be impeding the fuel flow. I don't have the tech manual. I changed the fuel filter 50...

I recently purchased this tractor used from a dealer. After a couple weeks of owning it I attached a bush hog and when I engaged the PTO, nothing happened. I was sitting in the seat. Tried it in neutral, and everything I could think off and nothing. The dash light comes on when I pull the...

Hello I bought a 4410 with 1500 hrs . The mfwd doesn't work. The switch works and the cylinder that actuates the cross shaft moves if it痴 unpinned from the cross shaft . However the cross shaft will not rotate . Any help would be greatly appreciated!! Thank you

I thought I'd post this as a reminder that when you have an electrical issue with your tractor, always start with cleaning the the battery posts and terminals. Always. My 4410 started having intermittent electrical issues. It would start and run just fine, but occasionally after shutting it...

The other day tractor started right up and throttled up fine. Loader hyds and mid deck lifted fine. Had no forward or reverse pushed pedals and nothing. I checked seat switch and still nothing. Codes were flashing did not copy at that moment. Shut off to come back to it later. Come back in...

The JD4410 tractor will start/run but not move. Need assistance getting the tractor mobile to get it serviced. Anyone know of anyone who provides this service?

In the process of buying a 5-acre property somewhat open and down sloped not very steep I was looking at buying a new John Deere compact tractor and happened to find a used one which seems like around California is kind of a rare find it's a John Deere 4410 has a 420 loader, a backhoe...

Good afternoon, One of the rear draft arms on my 4410 broke right across the attachment point for the lifting arm. It was a clean break. The tractor is 16 years old. I priced out a replacement and it was around $250 bucks. Ouch! I decided to take it to my local welding shop instead. They...

Only 700 hours. No loader. Belly deck. All service intervals performed. In great condition.

So I have a Frontier FP2206 weighs 995lbs. After running for a couple hours, the 3 point hitch operate very slow, if I run the RPM’s all the way up it lifts but struggles to get to the top. I bough the tractor February this year 2019 and they said they changed all filters and fluids. As anyone...

I just bought a T6 Harley rake with the hydraulic angle. The cylinder keeps slipping since the T6 does not have a lock valve on it to lock the cylinder and keep it from moving. I found one on Surplus Center that will work for $120 that I can put on the T6 with some new hoses and such, but I...

I just recently purchased a 4410 and it was working fine for about 1-2 hrs. Today I was using a box blade when I suddenly lost forward. It will go in reverse fine but when I put in in forward and release the clutch it goes forward about a foot and stops. The code is flashing 1 short 1 long 2...

A few days ago my son filled up the fuel tank quite full with diesel. After returning from some bumpy back-blading, he noticed that the needle on the fuel gauge had somehow jumped to the wrong side of the stop pin so it no longer registers. I've tried using a strong magnet to move it into the...

Hello All, I have been helping my neighbor with his 2005 JD 4410 that will not engage the starter. Here is what we know so far. 1. Turning the key we here the injector solenoid open and the close after about 1 second. 2. Moving the ignition switch to start does not engage the starter. 3...

My jd 4410 won't go forward or reverse. The pedals are attached to linkage that is attached to a rheostat pot. The fault code chart says the "Error status will reset when both pedal commands return to zero". Does anyone know how to reset the f/r pedal command to zero.

Hello! I got a great deal last fall on a JD 4410 but it didn't have a loader and I'd like to add one. I know the factory sold it with a 430 and I've been watching craigslist, but anyone have a favorite aftermarket brand or one to avoid like the plague? Whatever I get, I'd like the skid steer...

Hello, long time member, just haven't been around much. I recently purchased a 2002 John Deere 4410 e-Hydro trans. It has the 430 loader on the front and a 48 backhoe on the rear. The problem I'm having is that I get no forward or reverse drive until I have the RPMs up around 1500 or higher...

I have a John Deere 4410 Hydro and have tried to calibrate it and have tested everything and it all seems ok I can do the foot pedal calibrations ok and the throttle calibration but when I do the drive calibrations there is no output voltage to the proportional valves so the wheels don't turn...

I have a John Deere 4410 Hydro and have tried to calibrate it and have tested everything and it all seems ok I can do the foot pedal calibrations ok and the throttle calibration but when I do the drive calibrations there is no output voltage to the proportional valves so the wheels don't turn...

Looking for a pdf of the installation instructions for a LVB25085 power beyond kit for a 4410. Thanks

I have been troubleshooting an intermittent rear PTO issue. It randomly stops and may or may not start again. Sometimes tapping gently on the PTO solenoid does the trick, but this is becoming hit and miss also. I have a tech manual and have attached a diagram. I have several questions. How...

Fella comes on Wednesday to pick up my 2004 John Deere 4410 with 758 hours on it. He's getting a good deal and I'm moving on. I've got my eye on the Massey 2705e HST ($26500) for a few reasons: 1) 2705 is simple, it has none of the load match/cruse control/stall prevention, techno gizmo's...

Tapatalk - 44 error JD 4410 Hyd. Pbelow problem

I have a JD 4410 with 900 hours on it. I bought a 72 " finish mower a month or so again. I noticed when lifting the deck, there was a growl coming from the pump. It does it at 1600 rpm or below. If you lift it all the way to the highest point, the noise isn't very load, but when lifting to a...

Need a hood and a front headlight panel

Got both nuts loose but can't get the bar to turn to adjust the tow in/tow out. Pipe wrench? Heat? PB blaster? All?

Just changed the oil in the drive box at 500 hours. Filled to top of drain plug hole as recommended by manufacturer. Now it's leaking out of the bottom. :thumbdown: Would it be worth the effort to put some some stop leak in and if so, what kind and how much?

Service manual nor deck has info on belt tension for the mowing deck.

Lever no longer works so you can move steering wheel up and back. Steering column feels loose also. Anyone have a link for step by step repair?

Anyone know if there is a YouTube video to fix this or a step by step link here somewhere?

I have been scouring craigslist for a disc but haven't found anything to meet my needs yet. Thinking about biting the bullet and buying new. Does anyone have any suggestions as to a sturdy brand? I don't want to buy something cheaply made that will break. My soil is sandy loam, no clay, and...

Hi Guys, I'm new here and looking for any ideas or help you might have with my issue. I just purchased an older JD 4410 to replace my JD850. I love the upgrade! However there is an issue with my new 4410, at random it will freeze up (forward and reverse will not engage) and it happens at...

What brand, model and size do you recommend? My tractor is hydrostatic with 35 HP and 29 PTO. It is 50" wide. I plan on using it to initially mow about 55 acres of old orchard land (trees have been removed). There are some small bushes, sumac and the like.

I have a JD 4410 with 430 FEL and 47 backhoe. I am looking at a used JD 72" MMM that came off a 4310. It is said that it should fit. Mower comes with the mower brackets (arms), front linkages, gearbox, and PTO shaft it is advertised as a 540 RPM PTO. I know I need a mid mount PTO I think...

JD 4410 won't start. good battery, and alternator.no crank. Nothing happens when turn ignition key. Fuse problem? Any ideas? Thanks

Don't have a service manual and I am assuming the filler is the breather cap just above the PTO in the rear, is this correct? Also is this the source for all hydraulic fluid for the entire tractor? There is also some kind of pump on the lower right side of the engine with a cap that says oil on...

Hi! Posted this in wrong place (?), try again :-) In the back of my JD4100, there are a hydraulic line with a suction filter originally. (In the manual). But someone who owned the tractor earlier has replaced it with a electric 2-way valve. When i activate the valve by a not original mounted...

Hi! In the back of my JD4100, there are a hydraulic line with a suction filter originally. (In the manual). But someone who owned the tractor earlier has replaced it with a electric 2-way valve. When i activate the valve by a not original mounted switch, i can hear the engine is working harder...

Hey guys! Brand new to site. 500 hours. Just noticed a pretty bad leak. Replace seal or other fix?

Looking for some insight on 2002 Kubota L4310 versus 2012 John Deere 3038e versus JD 4410. All have loaders with 4x4 and HST. All are from private sellers. All say they've been serviced and not been worked too hard. All seem in similarly good shape with about 75% of tire wear remaining...

I do not own this machine but trying to help a buddy out, This is a power shuttle model with the pto switch and one rocker switch on the right hand panel. Through reading previous threads this model has a normally closed solenoid for fwd. We found the solenoid wires unplugged from the solenoid...

Help a Brother! :confused2: I have read some threads on adding remotes, but am unsure of how best to accomplish what I want to do. I would like to add a grapple or 4n1 bucket on the front, but would also like to add 1 or 2 remotes on the rear. There was a factory kit for the rear, (LVB25084)...

Just like it says.... the power steering works, the rocker shaft works, pto works. any ideas what to check?

Just like it says.... the power steering works, the rocker shaft works, pto works. any ideas what to check?

My 4410 had been having issues with the battery staying up so I changed it and it started right up perfect them my son says there is smoke coming out by the bake pedals so he turns it off . I take the panels off and start looking for melted wires or something cant find anything, we to try...

Had another set of flashes on my JD4410 tonight, 3 short, 1 long. Everything seems to be working fine. Maybe it's just a maintenance reminder? I'd love to know if there was a place I could look these up on my own without posting it or calling the dealer each time. Thanks!

FIXED! JD4410 Hydro....won't move forward or reverse I have a 4410 with 675 hours on it, last night while mowing it would not move forward or reverse. Engine and hydraulics are running fine. I checked the owners manual and searched the forums here as well. I believe it might be a clogged...

The curl function on my John Deere 4410 leaks down. The corresponding function on the rear of tractor also leaks down. Is there anything that can be done short replacing spool valve?

I am new to forum but looks great for owners I have a John Deere 4410 Hydro and have tried to calibrate it and have tested everything and it all seems ok I can do the foot pedal calibrations ok and the throttle calibration but when I do the drive calibrations there is no output voltage to the...

Trying to help a neighbor with a John Deere 4410. The tractor has been sorely neglected in the maintenance department, but we are going through that and getting it done. I can't find anything on how to adjust the brakes, which seem to be dragging. Any advice? Thanks, Dave

After I let it warm up drove it over to unload trailer and had to get out of seat so I shifted to neutral and set the parking brake. When I got back behind the wheel, I released parking brake, put it in gear, eased out on the clutch and it loaded up as if the parking brake were still engaged...

I was looking at the parts breakdown and I was wondering if anyone knows if the seal kit does both pumps or just one? The diagram notes the parts for both pumps with an (A), but when I googled the kit number, and Amazon has it and shows only one set in the picture. I'm not sure if I need 1 set...

2003 4410 JD tractor load match function stopped working. I took it took it to the dealer and they did the following. Replaced the mf4wd sensor and the fly wheel sensor. Re programed or calibrated several other things. Changed the oil and filter on the hydrostatic transmission. They also...

I have a JD 4410. All of the body panels are some type of plastic. The main hood has some cracks. Does anyone know how to repair them? Thanks!

Hello, I found some JD offers for 4-5k 2004year. Can this be real offer or it's some kind of scam? Thank You

I found a 4410 diesel w/430 loader and 6 foot bucket and eHydro trans for sale locally. Can't read the hours since its a digital hour meter and no display when off. Sitting out by curb for sale, no one home to talk to when I stopped. No info on sign just "for sale". So quick walk around I see...

Trying to help out a buddy that is building a new place. He's built a beautiful steel building and put an apartment in it where they will live until they can build a house. He's got a pretty bad slope right behind the building. County engineers told him he had to spread gravel on it to break up...

Hello, we have a JD 4410 at our business we use for moving trailers. Recently when pressing forward or reverse peddles it is very sluggish, is this a low oil problem and where can I check levels, and where would the filler hole be.[/B]

Just broke my steering cylinder and want to replace it myself. Cannot seem to get the joints out, Are they pressed in?

I have a John Deere 4410 that I bought about 4 months ago. This is my first tractor and do not know very much about them. I have noticed recently that there is a leak somewhere around the left rear tire. I was wondering if anyone could explain to me how I can fix the problem either: 1. A...

Well, I need some advice... Hopefully you guys can help. I have 20 flat acres where construction of my house will be begin soon. I'll be mowing about 5 acres, maintaining a 200 ft driveway, putting in trees and fence posts and doing some landscaping. A buddy will also be digging a 1 acre...

Ok, so I had to join cause I can't find info on this at all! I have a JD 4410 e-Hydro. Last weekend I had to change a left rear axle seal. What a job for a seal! Everything seemed to work good. But today I was going to drive to a property down the road, but I have no C gear! I checked the...

Looking forward to mowing 40 acres and yanking small brush out from horse fencing. Probably lots more once I get around to it.

We just purchased an '04 4410 and the tilt steering won't lock into place. I tried to get the steering wheel off but its splined and is a pain to get off. Any one have any suggestions? The lever that is supposed to slip in won't move or budge at all, and its annoying to have the steering...

Hey all...I just joined after purchasing an '04 JD 4410, just wanted to say and bug you all for a minute. Tractor seems to be pretty good for what we are going to using it for. A an issue that has come up since getting home and going through everything. The headlights and turn signals don't...

I'm looking at an '03 4410. has the following: belly mower 430 loader rops 3 remotes 880 hours mfwd (looks like all 4410's have this) hydro r4 tires at least 50% worn. they're asking 13.5k. what do you all think? if you all think it's an ok deal i'm going to go pick it up tomorrow :) i'm...

Anyone have any sugestions or experiance with the PTO not working on these tractors? my tractoer is a 2004 year model thanks

Bought a JD 4410 Hydro over the weekend. Came with 60" JD front mount snowblower and a Kingcutter 50" rear 3 pt. tiller. Tractor has around 1000 hrs on it. I paid $14375 for the package, which I felt was fair. Would like to obtain a loader for it also.:thumbsup:

I am getting new tires for my 4410. I have turf on now and want to go to something with a more agressive tread either ag or industrial. The book calls for 7-14 and 11.2-24. if I put a 27x8.50-15 on the front, what size do I need in the back. What are my other size options.

Could anyone tell me if Every 4410 is compatibe with a mid mout pto?

My neighbor, who is not very computer-savvy, had a piece of firewood fall on his 4410 hood and break it into pieces. When I look on the internet, I see ones on eBay for $299 with free shipping, and ones for $240 with $25 shipping. Does anyone know of a used hood which might be available for less?

my john deere 4410 pto won't work. I connected my friends bush hog. Pulled the yellow knob. the light on the dash illuminates but the pto wont spin. I think it may have something to do with the seat safety. There are a pair of wires black and light blue that are not connected to anything to the...

Which of these two would you rather have? They look to be almost the same tractor, built around the same time. From looking the 4410 has maybe 2 or 3 HP more and a weighs a few hundred more pounds. Lifting capacitites are about the same. The 4410 has a 430 loader the 4310 has a 420 loader...

my jd 4410 will not move forward or reverse and the warning light is blinking in blink------blink------blink-blink sequence.what to do ??? :confused2:

2002 --JD4410 electric hydro . Does anyone know if a relay goes in to the fuse box at "K5" or a Diaode that is shaped like the VF4 relays. Four VF4 relays are now plugged in and at least ten 7866. I bought the tractor used and very abused last Friday for a project. Many features do not work...

any ideas where the best place is to get some R1's to replace my R4's? assuming i'll need new wheels too. the 1/2 worn R4's just dont cut it on my farm. are R1's more/less/same price as R4's? i'm a bit overwhelmed at the info in the operators manual. not sure which size R1's are the 'best'...

I just bought a used 4410 with 800 hrs and the ehydro. My neighbor has the same tractor, but mine is slower than his. There are no error codes flasing. I read about calibrating the sensors, and I will try that. Since there are no error codes, how do I erase the current calibration? Do I...

Blowing snow for the first time this year and almost done when I couldn't raise the rockshaft arms. I have had a very small oil leak over the past summer so I checked the oil level and it was a gal low so I filled it. No luck with the rockshaft arms. All other hydraulics work great. Looking at...

I have a front mounted snow/grader blade that is 66" wide and 18" high. JD want $1500 for a 7' blade that is still low. The mounting hardware is very heavy and I'm thinking of mounting a bigger blade, maybe even poly on it. Figure maybe check out the truck snow blades that are available. I...

I have a John Deere 4410 with industrial tires. I live in snowy Northern MI on a very big hill. I purchased JD tire chains for the tractor to help get around. My problem is that there is not enough clearance to use the rear chains. On one side they hit on the brake linkages and on the other...

I just spent $300 on chains for my tractor. They were at the widest setting with the valve stems on the outside. These chains are pretty beffy and they will not fit without hitting the fender . There is also linkage underneath that it will interfere with. I did reasearch before I bought...

I have been shopping tractors and finally found the one . Unfortunately it has no mid pto . The John Deere parts website says the kit (LVB25291) is no longer available. This is very upsetting since I had all kind of plans to mount a front snowblower. Can anyone direct me to where I "might" be...

Hi, I have been reading this forum for awhile and I'm glad I can finally jump in and mix it up. I have been looking for a good tractor for my land now for a few months. I am really looking for a ~30 HP tractor with a front end loader that at some point I will be adding a back-hoe attachment...

If anyone is interested I noticed a JD 4410 on ebay that was burned in a fire. Would be a good project tractor. JOHN DEERE 4410 COMPACT 4X4 DIESEL UTILITY TRACTOR NICE - eBay (item 180301281152 end time Oct-25-08 18:10:15 PDT) "ere is a good start to a great project, 2004 Deere 4410 HST 4x4...

i have a john deere 4410 e hydro compact that when i shut it down and restarted next day it will not move forwards or backwards, checked all fluids, no blown fuses, all hyds work fine, seat switch checks okay, pedals full up not stuck, all connections okay at foot switchs, pto fine , loader fine...

Need a value on a JD 4410 with 430 loader/74" bucket, e-hydro, 4WD, Turf tires and only 270 hours. New battery and perfect upkeep.

When I push the brakes on my dad's 4410 it brakes but doesn't release after you let go of the brakes. The pedals will come up but the brakes don't release. A friend of mine had a 4310 doing the same thing so he told me to get underneath the tractor with a hammer and knock the brake back. It...

Hey all Found this on the Ontario Canada craiglist site. JD 4410 TLB for a super low price. Too good to be true I think. Here is the response from the "seller" to my emial. Hello there, Thank you for your email.Here are some details about the tractor: THE TRACTOR HAS TURF TIRES, POWER...

I recently purchased a low hour JD4410 compact tractor. Whenever I turn the tractor on, the tachometer jumps right up to 2000 RPM and stays there. I can move the throttle up and down and the engine RPM's move up and down with the throttle but the tach reads 2000RPM no matter if the throttle is...

I sold a 4410 with a 430 FEL and bought an 870 with a 440 FEL. The loader on the 870 is one heck of a lot slower when I curl the bucket up than the 430 loader. Any reason why? Also, Anyone know the lift capacity on the 440 loader? Thanks

JD 4410 won\'t start jdown-ML-867196-ML- JD specific post

JD 4410 won\'t start After intense bushhogging yesterday afternoon, I shut it off and went to bed. Got up in the morn after leaving it outside in a thunderstorm (unusual for me as its usually garaged) and it won't start. Engine turns over if I connect the starter + to the starter -, but only...

I have a john deere 4410 with a 430 quick attach loader, I am having a problem with the curling of the bucket, when I remove my quick attach bucket and try to hook up another attachment, one cylinder will move all the way up and the other cylinder will not move up until the first cylinder is...

buyjd-ML-821555-ML- JD Specific post

Hey ya'll, Great community! The amount of knowledge And wisdom here is inspiring. I'm looking for my first tractor for our new place here in Arkansas. (No more hurricanes for us!) We have a nicely laid out 27 acres place at the end of the road w/.5 mi. creek frontage. About 22 (7bobttom, 15...

I am looking for a Rototiller for a JD 4410 with eHydro. I have looked at the JD website and they reference the 655 and 665 tillers (both of which are commercial duty) but I cannot find anything about them on the website. I read somewhere that the eHydro transmission had a problem with a tiller...

Is there much of a difference between these two models? I'm told that the 4410 is the older version of the 3520. I can find lots information on the 4410 but not much on the 4400. Did JD just rename its lineup or is the 4400 really different from the 4410? While you are at it, it you have...

I have a 2002 JD 4410, turfs, 4x4, e-hydro, rear & mid PTO and 3rd SCV, 348 hrs, with JD 430 loader, JD 72" MMM, and Woods RB72 (72" rear blade). Also have 2005 JD X-495, with 54" MMM, 3bag powerflow, 47" snowblower, and JD 48" plug aerator. Both tractors are great but due to the Delphi...

Hello, just got my new/used 4410. It has 150 hrs. on it FEL. Anyone else out there own one of these. Wouldn't mind getting some pointers. First question is how do you get the steering wheel to tilt. It looks like it tilts but is not the same configuration as the manual so instructions in...

Guy wants $18,000, no loader with MMM. 20 hours and like new. Seems high. What should I be paying? I don't reaaly need the mower. But I would need a loader. How much for the tractor alone?

Is following a fair price for a JD 4410 tractor?: 4410: $19,749 Ehydro: $1,200 Industrial tread tires: $204 Joystick: $714 300x loader: $3,159 655 tiller: $2,100 LX5 rotary cutter: $1,301 Ballast box: No charge Freight & setup: $350 Delivery: $200 Subtotal: $28,977...

Any recommendations for where to find such an attachment. Either a blower, or something that will collect them THanks

Hi all, Been lurking here along with several other sites for about a week doing research on which tractor to buy. You all have a great site with quite a bit of good information. I am posting this to maybe help others with pricing. I purchased a 4410 w/ 4wd (standard), eHydro, speedmatch...

According to JD's used equipment site. a local dealer here in NC has two 2002 JD 4410's MFWD, e-hydro, all the electronic options, R4's, and about 500 hrs. each priced @ $13,700. Sounds like a good price, especially after a little nego. I might have to go look at one myself, but it's a little...

We are trying to decide what the best tractor for us is. We want to have an all purpose tractor that is not too bulky to get around the barn that also can mow the pastures a few times during the summer. We have about 15 acres of pasture that is hilly with some slopes that approach a 30% grade...

I was attaching the 4410 Backhoe, and the Rockshaft arm wouldn't align the pin. I figured that I could connect the hydraulics and jiggle it in. When I started the tractor, I realized that I hadn't unfolded the ROPS. The ROPS pressed against the levers, straightening out the dipstick and...

Just bought a new 4110, and it hasn't arrived yet. I was wondering if anyone knew the exact height to top of the ROPS on a 4110 with non-foldable ROPS and Turf Tires. The JD spec says 79 inches with R1s, so I'm not sure what the height with the R3s would be. Thanks!

buyjd-ML-239320-ML- Only non-brand specific and comparison questions should be posted here. Moved to JD Buying/Pricing.

I am going shopping for a JD 4410. With 4 WD,EHydro, backhoe,loader,PH digger and a mower I have not decided on. I will mow 4 acres of rough lawn. Mid mount or grooming which would also go into the woods and make a trail for hunting, should I get a brush hog type in addition to a mid mount? Any...

To all 4410 owners: please check your right front tire and rim to see if your rim is eating into your alxe housing where your ty rod end hooks to your wheel. mine is it has a ridge worn into the housing about 1/8th -- to 1/4" deep. I checked one sitting at a dealership it also has it. the rim...

I just purchased a JD 4410 and am really happy with it. I have one question regarding the throttle position. Is it normal for the throttle to back off a little? When I set it at max throttle 540 for using tiller or mower attachment, it does not stay in this position and I have to keep pushing...