john deere 2040

  1. S

    help requested with a John Deere 2040 closed center

    I have a 405xxx serial number JD 2040. she was running fine. well she had a leaking Injector pump which we rebuilt/sealed. I also dropped the loader down a bit to help reach the starter which I replaced at the time. Tractor running great now no more loss of power from leaking IP. Start it up...
  2. M

    JD 2040 year 1976

    I have a JD 2040 s/n 211506 L. Is there a kit for remote hydraulic install
  3. J

    John Deere 2040 with Open Center valve on FEL

    So, I’m kind of a newbie here. I recently purchased an older John Deere 2040 with what I’m being told is closed center hydraulics on it. The tractor has a “newer“ John Deere 521 front end loader on it that has a valve for open center hydraulics on it. According to the guy that has looked at it...
  4. J

    John Deere 2040 Hydraulic squeal fixed or not?

    I removed the check valve between the transmission hydraulic pump and the front main pump, and the squeal from the front pump is gone after listening to it for 3 years. Can I leave out the check valve? or will this cause other issues? Any guesses as to why removing this check valve got rid...
  5. S

    Which cooling thermostat to use - JD 2040?

    Back again with yet another question. I am just about finished doing my pre-season maintenance on the above tractor. I am thinking of changing out the engine coolant thermostat. According to previous owners notes it has been in there for a 'long' time. The parts book shows three thermostats -...
  6. S

    HELP - Alternator/Generator Belt Removal/Installation - JD2040

    Hello all. Hate to bother you but I have a JD 2040 1977 variety tractor. As I am not the original owner so I decided before the mowing season arrived, I would perform some major maintenance - new belt, hoses, clamps, fluids, filters, indicator lamps, wash job, etc. I ran into a bit of a problem...
  7. A

    Jd 2040 vs 2040s

    Hi all. Looking at a 2040s with a loader as we are now requiring a loader on the farm. What is the difference between these machines other than hp and age?
  8. M

    John Deere 2040 Hydraulic leak

    My JD 2040 is leanking hydraulic fluid from the base of the steering column. Any idea why fluid would be leaking out at the base and what do I need to do to stop it? Thanks
  9. M

    John Deere 2040 Electrical Wiring Schematic Help

    I have a JD 2040 that I recently bought and the wiring is a mess. Everything is unplugged and none of the gages work. I need to rewire it but I dont have any schematics. does anyone have any schematics for it that you woud share with me? Thank you
  10. N

    JD 2040 Rockshaft gasket FAILED!

    Hello everyone! This is my first post here on the forum, I've read through a bunch of threads the past few days and found some good information! So I've somewhat taken over doing maintenance on our 1980 JD 2040 from my Grandfather and wanted to see if anyone could help me out with this new...
  11. S

    Buying Advice  John Deere 2040 - YES or NO - ALL comments appreciated!

    Hello all. New to the forum as am now new to the world of tractors, pastures and "bush hogging." Wife and I purchased a house in Nov that came with several pastures totaling around 10 acres. Had someone lined up to cut, bale and haul the hay away with NO charge to me. Didn't pan out. Found a kid...
  12. spoofrider

    JD 2040 Rear SCV Hydraulics

    I was thinking about purchasing a JD 2040. I have some questions about the rear SCV Valves. This tractor has 2 sets. 1. Are there differences in Hydraulic oil ? When it comes to older tractors and newer implements ? 2. Can the oil be mixed ? Or would it lead to contamination and or damaging...
  13. S

    John Deere 2040

    Hi gays any one know why when I start my John Deere 2040 blows hydraulic filter gasket many thanks
  14. SnuffyNC

    1979 JD 2040 3pt sway bar illustration

    I am looking at buying sway bars for my 1979 JD 2040 (S/N 334***). I can find them online, but I cannot find how they actually attach to the lower arms of the 3 point hitch. If anyone can provide actual equipment pictures, illustrations, etc. I would be most appreciated. SnuffyNC
  15. H

    Loader to fit JD 2040?

    Hi, I have a John Deere 2040 (1981/1982) that I'm looking to put a loader onto as I need it for lifting bales and mucking out the cows. I want to do it as cheaply as possible (I have a max budget of 」1000) and my question is what loaders will go on it? There doesn't seem to be many older John...
  16. S

    John Deere 2040 about 1979 hydraulic line help

    i have had a hard time finding what part i need and the john deere dealership in town is useless. they only want to sell new tractors they have no use for people that need parts for old ones. any help will be greatly appreciated. leaking hydraulic fluid under the gas pedal area where the two...
  17. O

    jd 2040 with 143?? fe

    hello folks i have a 3 acres and bought a jd2040 i belive its a 143loader , can't find max weight it will lift, any help or directed to will be helpful. thanks Rick
  18. T

    jd 2040 will not pickup 3 pt hitch arms

    i have a JD 2040 that will not pick up the arms on the 3 point hitch anyone had this problem before and is the fix difficult?
  19. H

    John Deere 2040 quit driving

    I inherited a 1976 2040 and was driving through the pasture today getting ready to use the auger to dig some holes. I engaged the clutch pedal and coasted down a hill about 20 feet. At the bottom of the hill I let out on the clutch and it won't move. The PTO moves when it is engaged and you can...
  20. Rocky Hoffler

    John Deere 2040

    JD 2040 1982 less than 1000 hrs can any one have any input on value and tractor itself
  21. J

    JD 2040 rear end width ?

    Recently picked up a '79 JD 2040 that had a welded rim on one side, and a riveted rim on the other. Currently, the rear wheels are centered OK, and are a hair over 7 wide. I've got a 6 foot tiller that I want to run on this, but because of the 2 styles of rims, I can't see a way to get a...
  22. R

    john deere 2040

    trying to locate a AL34744 slave cylinder and AL37471 reservoir richard
  23. N

    HELP ON IDENTIFYING MY JOHN DEERE 2040

    My stepfather and I bought a JD 2040 a couple years back and I'm having some hydraulic issues. I can fix the problem, but identifying the parts I need are troubling me. I can't seem to find any literature on the internet about it and I'm pretty internet savvy, plus it came with no book. The...
  24. R

    John Deere 2040 project Help Needed

    I am refurbishing a 2040 that has been in my family for a long time. It appears that some shortcuts have been made in the past. I have a primary Instrument cluster that has the warning lights, tachometer, fuel gauge and Temperature gauge int it. I removed the cluster today and it is full of...
  25. G

    Engine oil capacity for JD 2040

    Just got an old jd2040 needs some help ... What is engine oil capacity and should I change oil quickly in order to flush it some ... If so will a cheap 30/40 weight work?
  26. S

    Newbe but grew up a farmgirl need help with John Deere 2040 Diseal

    The ignition switch looks like a monkey pulled it apart and rewired it. I bought a new starter ;but I need a wiring diagram?
  27. S

    Hydraulics JD 2040

    Hi My brother used to tractor and did some heavy work with FEL:roll eyes: There is now no hid to FEL and 3 pt linkage. Have checked all filters and levels , Front pump and steering ok . Any ideas ??
  28. J

    gearbox issues jd2040

    Hello everyone I have a problem with the gearbox of my jd 2040 in second range 5th and 7th gear the just keep going kicked out underload anyone had the same problem yet
  29. D

    john deere 2040 hydrolic problem

    My grandfather has a john deere 2040, we replaced the hydrolic pump a few years ago, and after we did it seems not to work right. The power steering is slim to none, and the rear arms are slow to lift even at full throttle. We changed the oil and filter and still will not work right. After...
  30. D

    JD 2040 steering issue

    I have a JD 2040 with a fair amount of play in the steering wheel before it reacts at the wheels, what would cause this.
  31. D

    john deere 2040

    got a 2040 john deere got a new veil hydraulic pump new filter cleaned cart., new fluid still can't fluid threw the lines just spurs out what could be the problem?
  32. D

    John Deere 2040 Load control seals

    Just got my new seals installed on my tractor.Load control shaft wasn't wore bad enough to require replacement nor was the inside bushings that hold the shaft.So I just pushed the load control shaft in enough to get to the seals on one side then pushed it the other way to install the other...
  33. S

    John Deere 2040 locked up?

    Guys, Looking for advice to help me diagnose a problem with my 2040 diesel. I was clearing snow with it, had been running for about 5 minutes and it just died all of a sudden. It was about 10 degrees out, but the engine was pretty well warmed up. I had over a half tank of diesel in there...
  34. D

    JD 2040 clutch problems

    I recently was grading snow with my 2040 and it quit pulling.It has the dual stage clutch.I have had no trouble what-so-ever out of the clutch so don't understand why all of a sudden it would stop pulling.I put it into gear and it tries to move but it's like the clutch isn't engaging all the...
  35. T

    Comparison  First tractor purchase: JD 2040 v. MF 1260

    Hello! I am new to the forum... and to tractors. Just finished my first season as an organic farmer, and I am looking to buy my first tractor this winter. Budget is limited. Here is what I have found so far, would love to get your feedback on the selection - pros/cons, what to look for etc...
  36. LD1

    JD2040 Timing Balance shafts

    I got limited info on this tractor, and am asking for someone else. A friend of my FIL has a 2040 tore down to rebuild the engine. He is a diesel mechanic by trade, but is unsure on the procedure to time the balance shafts, or if they even need timed. He said they have marks, so I told him they...
  37. B

    Buying Advice  JD 2040 questions

    I am looking at a JD 2040 with a 145 loader. I was wondering if there is any bad things known about this model? The asking price is $6400. We currently have a 1010 with a 1010 industrial loader. I am looking to upgrade for more gears and a little heavier for my 3pt backhoe. Is there any parts...
  38. P

    3-Point Hitch  JD 2040

    I have a JD 2040 and have only used it to mow my place. Sometimes I would like to use it to pull around a utility trailer while working. What all is necessary for the tractor in order to pull the trailer?
  39. 3

    Buying Advice  '79 JD 2040 w/145 FEL

    Local dealer (Kubota), Wa. State, has a '79 2040 diesel w/145 FEL. Curious beyond oil in coolant/coolant in oil issues, leaks, blow by from the engine and wrong hydro fluid which I understand will tear up wet brakes and pulling tranny fill plug it verify no oil mist are there many other...
  40. F

    John Deere 2040 Brake parts

    Have a John Deere 2040 that needs brake disc, hardware and misc parts, just wondering what is the best place to get parts? Is there any good aftermarket parts places or are we better to go through John Deere. Please let me know. thanks
  41. P

    John Deere 2040 hydro problems

    Hello everyone, this is my first post and I'm looking forward to your imput. I just acquired a late model John Deere 2040 with what I belive is a 145 loader (has been painted). The bucket and boom are slow and week ,steering goes out now and then and the brakes will sink to the bottom. I changed...
  42. M

    John Deere 2040 hydraulic weirdness

    Hello All, I have an unusual hydraulic problem. For years I have been unable to figure it out. The problem is on a 1980 John Deere 2040. What happens is I go to the field in the morning and start to mow. I run a 9' New idea moditioner. It runs good and the pto comes on strong as one could...
  43. W

    JD 2040 Starting

    2040US, s/n 418308L ran and started fine before being parked for 2 years. Just replaced both batteries and now get only beeping when turning ignition switch (same warning as emergency brake on). I have giggled gearshifts knowing there is a neutral safety switch but still no start. This sounds...
  44. R

    Loader for my JD 2040

    Looking for a loader for my JD 2040. Would like to keep it green as in JD brand. The models that fit are 143, 145, 48?, 175, and 520. May consider other brands as well. Let me know what you have.....THANKS
  45. dntfxr

    Box Scraper  Sizing a box blade for my JD2040?

    Hi folks! I have a good bit of dirt to move around prepping our house pad and yard. I'd like to go with a 6' bb to move as much volume as possible but my tractor is 2wd. Would a medium duty 6'er around 700lbs be a good match for my tractor? On the other hand I also have the little kubota 7100...
  46. N

    John Deere 2040 valve flow

    Does anyone know the flow rate at the rear remotes for a John Deere 2040? I know the pump is capable of 13.5 gpm. I've seen some specs on TractorData.com that show different flow for the power steering, pump and remote, but it doesn't say for the 2040. Thanks in advance!
  47. M

    John Deere 2040 cuts off

    My tractor cuts off for no appearant reason. It is not running smoothly and the idle varies by as much as 400 RPM. It is full of fuel and I have cleaned the priming pump and screen beside the filter. Any suggestions?
  48. M

    John Deere 2040 cuts off

    My John Deere 2040 is not running smoothly and randomly cuts off for no appearant reason. The fuel tank is full and I have cleaned the bowl and priming pump beside the filter. Any suggestions?
  49. B

    John Deere 2040 Hydraulic Problem

    I inherited a John Deere 2040 (80s model) and let someone use it. Love it and loved working it as a kid but now it is mine to maintain which Dad always did:):) So, after loaning it out ....the hydraulics will no longer work for the aftermarket installed front-end loader and the three point...
  50. Johndeere3720

    John Deere 2040 hydraulic leak

    Monday in shop class i get to take the school's 2040 apart to replace a leaking hydraulic hose. To me I see it as an opportunity to learn a little about how the 2040 work's and get the hydraulic fluid off the shop floor as it is a hazard and liability on the school waiting for someone to slip...
  51. K

    Starting issues with john deere 2040

    Hey guys, ive tried to get help and all the things im doing just arent getting this tractor to turn over. A little history- its been sitting outside and hasnt been started in a year. I have the keys and stuff, but all of the wires from the back of the ignition are unplugged (no idea how that...
  52. K

    John deere 2040 help PLEASE!

    Hey guys, i have a early 80's late 70's john deere 2040. Its been sitting outside for about a year and hasn't been started since. I just went out today, replaced both batteries, had the starter checked by a local armature shop, and it still wont start. I need to hotwire it to start it because...
  53. K

    John Deere 2040 review/help

    Hello friends, i have a old john deere 2040. The year is 1980 and its the 2wd model with no cab. I was wondering if any of you owned one and what your opinions were on it? Right now its sitting, waiting for me to hot wire it when its batteries are fully charged haha. It hasnt been started up in...
  54. G

    Toplink  1982 JD 2040

    I have a 1982 JD 2040 and am about to purchase a bush hog for it. The sales person asks if I have a center link (top link?). Does the 2040 in question have this?
  55. L

    JD 2040 Shift pattern

    Hello all, newbe here, I bought a used 2040 and having a heck of a time finding an operators manual. I have a shop manual but it doesn't have fluid specs or quantities. Also I cant see the numbers on the shift lever case to determine shift pattern. I know it has hi/low lever and gear selector...
  56. L

    3-Point Hitch  JD 2040 top link

    Hello all, newbie here I've purchased a John Deere 2040 with a 145 loader (not sure of year, maybe 77) and I am needing to buy a top link for it. The trouble is I bought the tractor on a very cold day this winter and hauled it straight down to the property 90 miles away. I'm home in town and...
  57. F

    Oil & Fuel  JD 2040 fuel problems

    Does anyone have any experience with a 2040? I cannot get it to start, I am getting fuel to the injector pump but nothing out of it to the injectors. I have removed the end of the pump (where the fuel comes in) and cleaned everything in there including the filter. When I turn over the engine...
  58. T

    JD2040

    Hello, I have a 2040 JD that started to make a chattering noise in the hydraulic when you lift the 3 point and also the steering and 3 point do not work properly. First off I drained the hydraulic oil, pulled out the suction screen and cleaned (wasn't dirty at all), replaced the filter and...
  59. O

    1981 John Deere 2040 with over heating problem

    I have a 1981 2040 JD which has a problem with the hydrolic fluid over heating. The power steering unit below the steering wheel gets so hot you can not touch it without getting burned. I have changed the fluid and replaced the filter and cleaned the screen. I have cleaned the radiator. There is...
  60. _RaT_

    Need some part for a old 1984 JD 2040 4WD

    Google has not been much help. Any other ideas? I need diesel pump on/off solenoid, seat assembly, some orings or gaskets.... thanks, RaT....
  61. G

    JD 2040

    I have the opportunity to buy a 1978 JD 2040 with a 48 loader. The tractor was built in Mannheim, Germany. The tractor shows 363 hours, but from its age and appearance, I think that the meter has been replaced. I can't ask the owner (since deceased), but I knew him well and he took very good...
  62. _RaT_

    Anyone know much about the JD 2040?

    Our association has a JD 2040, we think its a 1982, loader, 4WD, 3 cylinder diesel, ags, with beat up sheet metal. We want to get rid of it. Ballpark figure if mechanically its in good shape but looks kind of lousy. Can you even buy metal for something like this anymore? Thanks, Mark
  63. R

    Price Check  1981 JD 2040 pricing

    I am new to this site and it has been very helpful in my tractor research. I am considering buying my first tractor (maybe this week) and want to make sure the dealer's price is fair. The dealer is very well know in our area (Washington County, Texas). The tractor is a 1981 JD 2040 hydro-stat...
  64. R

    john deere 2040

    Considering buying a 1980 John Deere 2040 with 2500 hrs. 42 pto hp. It is in good shape with maintenance records and one owner. The price is $6990. 2wd Any thoughts on the price? Also, trying to get input regarding opting for a newer 4wd Kubota 2600 with 27 hp/23 pto hp Whichever I buy, I...
  65. A

    JD 2040 with bucket

    Looking at buying this tractor. It has 5500 hrs looks great and run great. What is it worth?
  66. A

    JD 2040

    Where is the best source to find an owner's manual for this model? 1977 just bought it today.
Top